I just finished installing a Steeda adjustable clutch cable (old one
snapped). Already have an aluminum clutch quadrant. I must say it is VERY
nice. Pedal effort is about 2x less. Feels real good too. Hurray, Steeda!

-Mike

--
Melt away the Cellulite with Cellulean!
http://www.MeltAwayCellulite.com/

Brent P

In article <CQT7e.1278$JJ2.412@newssvr12.news.prodigy.com>, memset@recorddeal.com wrote:
> I just finished installing a Steeda adjustable clutch cable (old one
> snapped). Already have an aluminum clutch quadrant. I must say it is VERY
> nice. Pedal effort is about 2x less. Feels real good too. Hurray, Steeda!

Odd... my pedal effort with steeda cable, quadrant, and firewall adjuster
is higher, and lately it seems even more that it was before.

When my pedal effort got higher... that's the closer it was to snapping the
cable. Might wanna look at the cable & see if it's starting to fray.

-Mike

--
Melt away the Cellulite with Cellulean!
http://www.MeltAwayCellulite.com/


"Brent P" <tetraethylleadREMOVETHIS@yahoo.com> wrote in message
news:yqadnRVSJJjBqv3fRVn-2A@comcast.com...
> In article <CQT7e.1278$JJ2.412@newssvr12.news.prodigy.com>,
memset@recorddeal.com wrote:
> > I just finished installing a Steeda adjustable clutch cable (old one
> > snapped). Already have an aluminum clutch quadrant. I must say it is
VERY
> > nice. Pedal effort is about 2x less. Feels real good too. Hurray,
Steeda!
>
> Odd... my pedal effort with steeda cable, quadrant, and firewall adjuster
> is higher, and lately it seems even more that it was before.
>
>

RT

On Fri, 15 Apr 2005 18:36:18 GMT, <memset@recorddeal.com> wrote:

>I just finished installing a Steeda adjustable clutch cable (old one
>snapped). Already have an aluminum clutch quadrant. I must say it is VERY
>nice. Pedal effort is about 2x less. Feels real good too. Hurray, Steeda!
>
>-Mike

what car/year ?

1998 Ford Mustang GT ... w/ a few goodies.

-Mike

--
Melt away the Cellulite with Cellulean!
http://www.MeltAwayCellulite.com/


"RT" <noyabusiness@yahoo.com> wrote in message
news:d5s06115i0i9mekbs8irvfjjji974jqa9f@4ax.com...
> On Fri, 15 Apr 2005 18:36:18 GMT, <memset@recorddeal.com> wrote:
>
> >I just finished installing a Steeda adjustable clutch cable (old one
> >snapped). Already have an aluminum clutch quadrant. I must say it is VERY
> >nice. Pedal effort is about 2x less. Feels real good too. Hurray, Steeda!
> >
> >-Mike
>
> what car/year ?
>

Brent P

In article <dhY7e.1345$JJ2.308@newssvr12.news.prodigy.com>, memset@recorddeal.com wrote:
> When my pedal effort got higher... that's the closer it was to snapping the
> cable. Might wanna look at the cable & see if it's starting to fray.

Where did it frey? feels/looks fine under the dash. I'll crawl under and
see by the bell housing as well.

Very little fraying at the clutch fork where you adjust the cable...
noticeable, but very little. The most fraying happened at the quadrant
itself... Oh well :(.

-Mike

--
Melt away the Cellulite with Cellulean!
http://www.MeltAwayCellulite.com/


"Brent P" <tetraethylleadREMOVETHIS@yahoo.com> wrote in message
news:3fadnf3dk5FFOvzfRVn-gw@comcast.com...
> In article <dhY7e.1345$JJ2.308@newssvr12.news.prodigy.com>,
memset@recorddeal.com wrote:
> > When my pedal effort got higher... that's the closer it was to snapping
the
> > cable. Might wanna look at the cable & see if it's starting to fray.
>
> Where did it frey? feels/looks fine under the dash. I'll crawl under and
> see by the bell housing as well.
>
>

Brent P

In article <Jki8e.1648$JJ2.280@newssvr12.news.prodigy.com>, memset@recorddeal.com wrote:
> Very little fraying at the clutch fork where you adjust the cable...
> noticeable, but very little. The most fraying happened at the quadrant
> itself... Oh well :(.

I checked both ends, no freying. I lubed both. no lasting difference. I
then turned the firewall adjuster all the way in, then back out,
readjusting the clutch. It seems better now. given the noise coming from
under the dash, I think the bushings inside the tube are wearing out.
Will have to take apart the pedal assembly if it gets any worse. (There is
a shaft from the clutch pedal that runs inside a tube to where the
quadrant is mounted.)

Yeah, when my quadrant was put in... it came w/ no bushings... so mine is
noisy & a little difficult to depress, but still easier than before.

-Mike

--
Melt away the Cellulite with Cellulean!
http://www.MeltAwayCellulite.com/


"Brent P" <tetraethylleadREMOVETHIS@yahoo.com> wrote in message
news:Cq2dnRgg7dF7ev7fRVn-jg@comcast.com...
> In article <Jki8e.1648$JJ2.280@newssvr12.news.prodigy.com>,
memset@recorddeal.com wrote:
> > Very little fraying at the clutch fork where you adjust the cable...
> > noticeable, but very little. The most fraying happened at the quadrant
> > itself... Oh well :(.
>
> I checked both ends, no freying. I lubed both. no lasting difference. I
> then turned the firewall adjuster all the way in, then back out,
> readjusting the clutch. It seems better now. given the noise coming from
> under the dash, I think the bushings inside the tube are wearing out.
> Will have to take apart the pedal assembly if it gets any worse. (There is
> a shaft from the clutch pedal that runs inside a tube to where the
> quadrant is mounted.)
>

Well, I originally went with a noname aluminum clutch quadrant... but now am
tossing it out for (shipping today) a Steeda aluminum clutch quadrant. It
should be here in 3-4 days. I'm excited :).

-Mike

--
Melt away the Cellulite with Cellulean!
http://www.MeltAwayCellulite.com/


<memset@recorddeal.com> wrote in message
news:CQT7e.1278$JJ2.412@newssvr12.news.prodigy.com...
> I just finished installing a Steeda adjustable clutch cable (old one
> snapped). Already have an aluminum clutch quadrant. I must say it is VERY
> nice. Pedal effort is about 2x less. Feels real good too. Hurray, Steeda!
>
> -Mike
>
> --
> Melt away the Cellulite with Cellulean!
> http://www.MeltAwayCellulite.com/
>
>
>
>