Hiss >>>FastEd - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Forum Ford Forum

» Auto Insurance
» Featured Product
ยป Wheel & Tire Center

Go Back   Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.hi-po.big-block-ford-mercury
Register Home Forum Active Topics Photo Gallery Auto Loans Garage Mark Forums Read Auto Escrow

FordForums.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 06-16-2005, 18:01   #1 (permalink)
Jason
Guest
 
Posts: n/a
Hiss >>>FastEd

Was wondering if you could look something up for me. I can't seem to find
the part numbers for the equalizer bushings for my 73 mustang. WholeLottaTom
hooked me up with the engine side bracket bushings part number but to narrow
it down I'm after the frame side bushing # and the pedal rod to equalizer
bar bushing. I would try my local dealer buit it's a joke to get a number
and hope they knew what they were looking up. If you could I would
appreciate it ever so much. It's been my roadblock on getting the car
together. If I can't drive it why put all the work into it to look at it.

--
>>Jason


TS # 47


  Reply With Quote
Sponsored Links
Advertisement
 
Old 06-16-2005, 19:01   #2 (permalink)
HareBall
Guest
 
Posts: n/a
Re: Hiss >>>FastEd

"Jason" <Jason@NoOneHome.net> wrote in
news:h4pse.2083$wV5.1850@fed1read06:

> Was wondering if you could look something up for me. I can't seem to
> find the part numbers for the equalizer bushings for my 73 mustang.
> WholeLottaTom hooked me up with the engine side bracket bushings part
> number but to narrow it down I'm after the frame side bushing # and
> the pedal rod to equalizer bar bushing. I would try my local dealer
> buit it's a joke to get a number and hope they knew what they were
> looking up. If you could I would appreciate it ever so much. It's been
> my roadblock on getting the car together. If I can't drive it why put
> all the work into it to look at it.
>
> --
>>>Jason

>
> TS # 47
>
>
>


My local dealer will let me look at their microfiche when I go in there.

--
Larry
TS52
---------------------------------
He has all the virtues I dislike
and none of the vices I admire.
Sir Winston Churchill
  Reply With Quote
Old 06-17-2005, 19:01   #3 (permalink)
Jason
Guest
 
Posts: n/a
Re: Hiss >>>FastEd

Ed here works at a dealer and even has a microfiche stashed in his basement.
Yea he's sick. But if either of you get a chance I would much appreciate it.
The counter guys at the nearby dealer get stumped by the old micro.fiche

--
>>Jason


TS # 47

"HareBall" <HareBallSPAMSUCKS@comcast.net> wrote in message
news:Xns9677DA2E0B81CHareBallSPAMSUCKScom@216.196.97.136...
> "Jason" <Jason@NoOneHome.net> wrote in
> news:h4pse.2083$wV5.1850@fed1read06:
>
> > Was wondering if you could look something up for me. I can't seem to
> > find the part numbers for the equalizer bushings for my 73 mustang.
> > WholeLottaTom hooked me up with the engine side bracket bushings part
> > number but to narrow it down I'm after the frame side bushing # and
> > the pedal rod to equalizer bar bushing. I would try my local dealer
> > buit it's a joke to get a number and hope they knew what they were
> > looking up. If you could I would appreciate it ever so much. It's been
> > my roadblock on getting the car together. If I can't drive it why put
> > all the work into it to look at it.
> >
> > --
> >>>Jason

> >
> > TS # 47
> >
> >
> >

>
> My local dealer will let me look at their microfiche when I go in there.
>
> --
> Larry
> TS52
> ---------------------------------
> He has all the virtues I dislike
> and none of the vices I admire.
> Sir Winston Churchill



  Reply With Quote
Old 06-18-2005, 20:01   #4 (permalink)
fast Ed
Guest
 
Posts: n/a
Re: Hiss >>>FastEd

Jason wrote:
> Was wondering if you could look something up for me. I can't seem to
> find the part numbers for the equalizer bushings for my 73 mustang.
> WholeLottaTom hooked me up with the engine side bracket bushings part
> number but to narrow it down I'm after the frame side bushing # and
> the pedal rod to equalizer bar bushing. I would try my local dealer
> buit it's a joke to get a number and hope they knew what they were
> looking up. If you could I would appreciate it ever so much. It's
> been my roadblock on getting the car together. If I can't drive it
> why put all the work into it to look at it.
>
>>> Jason

>
> TS # 47




Hey Jason

I can take a look when I'm back at the dealership next week. I still have
the microfiche reader at home, but I don't have the set of old cards here.

cheers
Ed N.
TS # 27




  Reply With Quote
Old 06-19-2005, 16:01   #5 (permalink)
Jason
Guest
 
Posts: n/a
Re: Hiss >>>FastEd

Thank you much,

--
>>Jason

"fast Ed" <fast_ed@spamania.ca> wrote in message
news:aO4te.19000$yU.884424@news20.bellglobal.com...
> Jason wrote:
> > Was wondering if you could look something up for me. I can't seem to
> > find the part numbers for the equalizer bushings for my 73 mustang.
> > WholeLottaTom hooked me up with the engine side bracket bushings part
> > number but to narrow it down I'm after the frame side bushing # and
> > the pedal rod to equalizer bar bushing. I would try my local dealer
> > buit it's a joke to get a number and hope they knew what they were
> > looking up. If you could I would appreciate it ever so much. It's
> > been my roadblock on getting the car together. If I can't drive it
> > why put all the work into it to look at it.
> >
> >>> Jason

> >
> > TS # 47

>
>
>
> Hey Jason
>
> I can take a look when I'm back at the dealership next week. I still have
> the microfiche reader at home, but I don't have the set of old cards here.
>
> cheers
> Ed N.
> TS # 27
>
>
>
>



  Reply With Quote
Old 06-24-2005, 02:01   #6 (permalink)
fast Ed
Guest
 
Posts: n/a
Re: clutch bushings

Sorry to take so long getting back on here with the info, Jason.

I came up with C5AZ 7543 C for the bushing, but it's obsolete, no longer
available from Ford. For the pedal rod, C0AZ 7526 B, still available out of
the Memphis depot. They come from Ford as a package of 6, so the dealer may
want you to buy all 6 pieces if it's something they never usually sell.

cheers
Ed N.


Jason wrote:
> Thank you much,
>
>>> Jason

> "fast Ed" <fast_ed@spamania.ca> wrote in message
> news:aO4te.19000$yU.884424@news20.bellglobal.com...
>> Jason wrote:
>>> Was wondering if you could look something up for me. I can't seem to
>>> find the part numbers for the equalizer bushings for my 73 mustang.
>>> WholeLottaTom hooked me up with the engine side bracket bushings
>>> part number but to narrow it down I'm after the frame side bushing
>>> # and
>>> the pedal rod to equalizer bar bushing. I would try my local dealer
>>> buit it's a joke to get a number and hope they knew what they were
>>> looking up. If you could I would appreciate it ever so much. It's
>>> been my roadblock on getting the car together. If I can't drive it
>>> why put all the work into it to look at it.
>>>
>>>>> Jason
>>>
>>> TS # 47

>>
>>
>>
>> Hey Jason
>>
>> I can take a look when I'm back at the dealership next week. I
>> still have the microfiche reader at home, but I don't have the set
>> of old cards here.
>>
>> cheers
>> Ed N.
>> TS # 27


--
Ed Nicholson

Super Coupe Club of Ontario : www.sccoa.com/sccoo
SCCoA message boards : www.sccoa.com/forums
Great Lakes Cougar Club : www.greatlakescougarclub.com
Greater Toronto Area Mustang Club : www.gtamc.com



  Reply With Quote
Old 06-24-2005, 03:01   #7 (permalink)
Jason
Guest
 
Posts: n/a
Re: clutch bushings

Thanks a Bunch Ed. It will at least let me know that what I might find is
really what I'm looking for.

--
>>Jason


TS # 47

"fast Ed" <fast_ed@spamania.ca> wrote in message
news:t%Iue.13210$X57.608368@news20.bellglobal.com...
> Sorry to take so long getting back on here with the info, Jason.
>
> I came up with C5AZ 7543 C for the bushing, but it's obsolete, no longer
> available from Ford. For the pedal rod, C0AZ 7526 B, still available out

of
> the Memphis depot. They come from Ford as a package of 6, so the dealer

may
> want you to buy all 6 pieces if it's something they never usually sell.
>
> cheers
> Ed N.
>
>
> Jason wrote:
> > Thank you much,
> >
> >>> Jason

> > "fast Ed" <fast_ed@spamania.ca> wrote in message
> > news:aO4te.19000$yU.884424@news20.bellglobal.com...
> >> Jason wrote:
> >>> Was wondering if you could look something up for me. I can't seem to
> >>> find the part numbers for the equalizer bushings for my 73 mustang.
> >>> WholeLottaTom hooked me up with the engine side bracket bushings
> >>> part number but to narrow it down I'm after the frame side bushing
> >>> # and
> >>> the pedal rod to equalizer bar bushing. I would try my local dealer
> >>> buit it's a joke to get a number and hope they knew what they were
> >>> looking up. If you could I would appreciate it ever so much. It's
> >>> been my roadblock on getting the car together. If I can't drive it
> >>> why put all the work into it to look at it.
> >>>
> >>>>> Jason
> >>>
> >>> TS # 47
> >>
> >>
> >>
> >> Hey Jason
> >>
> >> I can take a look when I'm back at the dealership next week. I
> >> still have the microfiche reader at home, but I don't have the set
> >> of old cards here.
> >>
> >> cheers
> >> Ed N.
> >> TS # 27

>
> --
> Ed Nicholson
>
> Super Coupe Club of Ontario : www.sccoa.com/sccoo
> SCCoA message boards : www.sccoa.com/forums
> Great Lakes Cougar Club : www.greatlakescougarclub.com
> Greater Toronto Area Mustang Club : www.gtamc.com
>
>
>



  Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.hi-po.big-block-ford-mercury



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 15:06.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.