Hiss>>Tom - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Forum Ford Forum

» Auto Insurance
» Featured Product
ยป Wheel & Tire Center

Go Back   Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.hi-po.big-block-ford-mercury
Register Home Forum Active Topics Photo Gallery Auto Loans Garage Mark Forums Read Auto Escrow

FordForums.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 04-10-2005, 03:01   #1 (permalink)
Jason
Guest
 
Posts: n/a
Hiss>>Tom

Did you ever get a chance to check out the Z-bar bracket measurements for
the Torino pieces?

>>Jason


TS # 47


  Reply With Quote
Sponsored Links
Advertisement
 
Old 04-10-2005, 23:01   #2 (permalink)
Whole Lotta Tom
Guest
 
Posts: n/a
Re: Hiss>>Tom

Jason wrote:
> Did you ever get a chance to check out the Z-bar bracket measurements
> for the Torino pieces?
>
>>> Jason

>
> TS # 47



The equalizer tube measures 1" I.D. The engine side mount has a nylon
bushing of .98 O.D. I have a new bushing in a Ford bag with the number
C1AA-7543-A, available anywhere, that is .99 O.D. The frame side pivit has
a steel ball that is .845 O.D. A split bushing fits over this, which would
probably be .98 O.D., but I can't find mine right now. Izzat what you got?

--
Tom
TS3
http://www.geocities.com/styleline58/

Visit the Cleveland Engine Forum
http://www.351cleveland.net


Statesmen will invent cheap lies, putting blame upon the nation that is
attacked, and every man will be glad of those conscience-soothing
falsities, and will diligently study them, and refuse to examine any
refutations of them; and thus he will by and by convince himself that
the war is just, and will thank God for the better sleep he enjoys
after this process of grotesque self-deception.- Mark Twain

"Voice or no voice, the people can always be brought to do the bidding
of the leaders. That is easy. All you have to do is tell them they are
being attacked, and denounce the peacemakers for lack of patriotism and
exposing the country to danger. It works the same in any country." -
Hermann Goering

"We don't go out and hire journalists and propagandize and lie and put
people on payroll so that they'll say what you want."--Donald Rumsfeld,
12/24/2004


  Reply With Quote
Old 04-18-2005, 00:01   #3 (permalink)
Jason
Guest
 
Posts: n/a
Re: Hiss>>Tom


"Whole Lotta Tom" <tomcrocker@poboxnospam.com> wrote in message
news:x8m6e.1580$dT4.994@newssvr13.news.prodigy.com...
> Jason wrote:
> > Did you ever get a chance to check out the Z-bar bracket measurements
> > for the Torino pieces?
> >
> >>> Jason

> >
> > TS # 47

>
>
> The equalizer tube measures 1" I.D. The engine side mount has a nylon
> bushing of .98 O.D. I have a new bushing in a Ford bag with the number
> C1AA-7543-A, available anywhere, that is .99 O.D. The frame side pivit

has
> a steel ball that is .845 O.D. A split bushing fits over this, which

would
> probably be .98 O.D., but I can't find mine right now. Izzat what you

got?

Thats what I got when I finally dragged ass around to checking. Now anyone
know of a good Torino parts dealer? A mustang dealer wants $20 for the split
bushing but the others they sell won't fit. Are your pedal and clutch rod
bushing points .05?

>>Jason


TS # 47

>
> --
> Tom
> TS3
> http://www.geocities.com/styleline58/
>
> Visit the Cleveland Engine Forum
> http://www.351cleveland.net
>
>
> Statesmen will invent cheap lies, putting blame upon the nation that is
> attacked, and every man will be glad of those conscience-soothing
> falsities, and will diligently study them, and refuse to examine any
> refutations of them; and thus he will by and by convince himself that
> the war is just, and will thank God for the better sleep he enjoys
> after this process of grotesque self-deception.- Mark Twain
>
> "Voice or no voice, the people can always be brought to do the bidding
> of the leaders. That is easy. All you have to do is tell them they are
> being attacked, and denounce the peacemakers for lack of patriotism and
> exposing the country to danger. It works the same in any country." -
> Hermann Goering
>
> "We don't go out and hire journalists and propagandize and lie and put
> people on payroll so that they'll say what you want."--Donald Rumsfeld,
> 12/24/2004
>
>



  Reply With Quote
Old 04-18-2005, 19:01   #4 (permalink)
Whole Lotta Tom
Guest
 
Posts: n/a
Re: Hiss>>Tom

Jason wrote:
> "Whole Lotta Tom" <tomcrocker@poboxnospam.com> wrote in message
> news:x8m6e.1580$dT4.994@newssvr13.news.prodigy.com...
>> Jason wrote:
>>> Did you ever get a chance to check out the Z-bar bracket
>>> measurements for the Torino pieces?
>>>
>>>>> Jason
>>>
>>> TS # 47

>>
>>
>> The equalizer tube measures 1" I.D. The engine side mount has a
>> nylon bushing of .98 O.D. I have a new bushing in a Ford bag with
>> the number C1AA-7543-A, available anywhere, that is .99 O.D. The
>> frame side pivit has a steel ball that is .845 O.D. A split bushing
>> fits over this, which would probably be .98 O.D., but I can't find
>> mine right now. Izzat what you got?

>
> Thats what I got when I finally dragged ass around to checking. Now
> anyone know of a good Torino parts dealer? A mustang dealer wants $20
> for the split bushing but the others they sell won't fit. Are your
> pedal and clutch rod bushing points .05?
>
>>> Jason

>
> TS # 47


Three thousand words:

http://www.network54.com/Realm/tomsource/MVC722F.JPG

http://www.network54.com/Realm/tomsource/MVC723F.JPG

http://www.network54.com/Realm/tomsource/MVC724F.JPG

The stud for the 1 piece bushing is .63 diameter. The ball for the two
piece bushing is .84 diameter.

Izzat whatchoo was askin'?

--
Tom
TS3
http://www.geocities.com/styleline58/

Visit the Cleveland Engine Forum
http://www.351cleveland.net


Statesmen will invent cheap lies, putting blame upon the nation that is
attacked, and every man will be glad of those conscience-soothing
falsities, and will diligently study them, and refuse to examine any
refutations of them; and thus he will by and by convince himself that
the war is just, and will thank God for the better sleep he enjoys
after this process of grotesque self-deception.- Mark Twain

"Voice or no voice, the people can always be brought to do the bidding
of the leaders. That is easy. All you have to do is tell them they are
being attacked, and denounce the peacemakers for lack of patriotism and
exposing the country to danger. It works the same in any country." -
Hermann Goering

"We don't go out and hire journalists and propagandize and lie and put
people on payroll so that they'll say what you want."--Donald Rumsfeld,
12/24/2004


  Reply With Quote
Old 04-18-2005, 21:01   #5 (permalink)
Jason
Guest
 
Posts: n/a
Re: Hiss>>Tom

A
"Whole Lotta Tom" <tomcrocker@poboxnospam.com> wrote in message
news:QqY8e.523$Xb4.197@newssvr21.news.prodigy.com...
> Jason wrote:
> > "Whole Lotta Tom" <tomcrocker@poboxnospam.com> wrote in message
> > news:x8m6e.1580$dT4.994@newssvr13.news.prodigy.com...
> >> Jason wrote:
> >>> Did you ever get a chance to check out the Z-bar bracket
> >>> measurements for the Torino pieces?
> >>>
> >>>>> Jason
> >>>
> >>> TS # 47
> >>
> >>
> >> The equalizer tube measures 1" I.D. The engine side mount has a
> >> nylon bushing of .98 O.D. I have a new bushing in a Ford bag with
> >> the number C1AA-7543-A, available anywhere, that is .99 O.D. The
> >> frame side pivit has a steel ball that is .845 O.D. A split bushing
> >> fits over this, which would probably be .98 O.D., but I can't find
> >> mine right now. Izzat what you got?

> >
> > Thats what I got when I finally dragged ass around to checking. Now
> > anyone know of a good Torino parts dealer? A mustang dealer wants $20
> > for the split bushing but the others they sell won't fit. Are your
> > pedal and clutch rod bushing points .05?
> >
> >>> Jason

> >
> > TS # 47

>
> Three thousand words:
>
> http://www.network54.com/Realm/tomsource/MVC722F.JPG
>
> http://www.network54.com/Realm/tomsource/MVC723F.JPG
>
> http://www.network54.com/Realm/tomsource/MVC724F.JPG
>


Excellent Dr. Jones.
Thats the exact same pieces I've got sitting.

> The stud for the 1 piece bushing is .63 diameter. The ball for the two
> piece bushing is .84 diameter.
>
> Izzat whatchoo was askin'?
>


Yep that answers it all, now do you know of reliable Torino part vendors?

>>Jason


TS # 47


> --
> Tom
> TS3
> http://www.geocities.com/styleline58/
>
> Visit the Cleveland Engine Forum
> http://www.351cleveland.net
>
>
> Statesmen will invent cheap lies, putting blame upon the nation that is
> attacked, and every man will be glad of those conscience-soothing
> falsities, and will diligently study them, and refuse to examine any
> refutations of them; and thus he will by and by convince himself that
> the war is just, and will thank God for the better sleep he enjoys
> after this process of grotesque self-deception.- Mark Twain
>
> "Voice or no voice, the people can always be brought to do the bidding
> of the leaders. That is easy. All you have to do is tell them they are
> being attacked, and denounce the peacemakers for lack of patriotism and
> exposing the country to danger. It works the same in any country." -
> Hermann Goering
>
> "We don't go out and hire journalists and propagandize and lie and put
> people on payroll so that they'll say what you want."--Donald Rumsfeld,
> 12/24/2004
>
>



  Reply With Quote
Old 04-18-2005, 22:01   #6 (permalink)
Whole Lotta Tom
Guest
 
Posts: n/a
Re: Hiss>>Tom

Jason wrote:
> A
> "Whole Lotta Tom" <tomcrocker@poboxnospam.com> wrote in message
> news:QqY8e.523$Xb4.197@newssvr21.news.prodigy.com...
>> Jason wrote:
>>> "Whole Lotta Tom" <tomcrocker@poboxnospam.com> wrote in message
>>> news:x8m6e.1580$dT4.994@newssvr13.news.prodigy.com...
>>>> Jason wrote:
>>>>> Did you ever get a chance to check out the Z-bar bracket
>>>>> measurements for the Torino pieces?
>>>>>
>>>>>>> Jason
>>>>>
>>>>> TS # 47
>>>>
>>>>
>>>> The equalizer tube measures 1" I.D. The engine side mount has a
>>>> nylon bushing of .98 O.D. I have a new bushing in a Ford bag with
>>>> the number C1AA-7543-A, available anywhere, that is .99 O.D. The
>>>> frame side pivit has a steel ball that is .845 O.D. A split
>>>> bushing fits over this, which would probably be .98 O.D., but I
>>>> can't find mine right now. Izzat what you got?
>>>
>>> Thats what I got when I finally dragged ass around to checking. Now
>>> anyone know of a good Torino parts dealer? A mustang dealer wants
>>> $20 for the split bushing but the others they sell won't fit. Are
>>> your pedal and clutch rod bushing points .05?
>>>
>>>>> Jason
>>>
>>> TS # 47

>>
>> Three thousand words:
>>
>> http://www.network54.com/Realm/tomsource/MVC722F.JPG
>>
>> http://www.network54.com/Realm/tomsource/MVC723F.JPG
>>
>> http://www.network54.com/Realm/tomsource/MVC724F.JPG
>>

>
> Excellent Dr. Jones.
> Thats the exact same pieces I've got sitting.
>
>> The stud for the 1 piece bushing is .63 diameter. The ball for the
>> two piece bushing is .84 diameter.
>>
>> Izzat whatchoo was askin'?
>>

>
> Yep that answers it all, now do you know of reliable Torino part
> vendors?


My first stop would be the regulars like Autokrafters, Dearborn Classics,
Mustangs Unlimited, Ebay:

http://cgi.ebay.com/ebaymotors/ws/eB...543771543&rd=1

Looks like that split one is the one ya gotta search for.


>
>>> Jason

>
> TS # 47
>
>
>> --
>> Tom
>> TS3
>> http://www.geocities.com/styleline58/
>>
>> Visit the Cleveland Engine Forum
>> http://www.351cleveland.net
>>
>>
>> Statesmen will invent cheap lies, putting blame upon the nation that
>> is attacked, and every man will be glad of those conscience-soothing
>> falsities, and will diligently study them, and refuse to examine any
>> refutations of them; and thus he will by and by convince himself that
>> the war is just, and will thank God for the better sleep he enjoys
>> after this process of grotesque self-deception.- Mark Twain
>>
>> "Voice or no voice, the people can always be brought to do the
>> bidding of the leaders. That is easy. All you have to do is tell
>> them they are being attacked, and denounce the peacemakers for lack
>> of patriotism and exposing the country to danger. It works the same
>> in any country." - Hermann Goering
>>
>> "We don't go out and hire journalists and propagandize and lie and
>> put people on payroll so that they'll say what you want."--Donald
>> Rumsfeld, 12/24/2004


--
Tom
TS3
http://www.geocities.com/styleline58/

Visit the Cleveland Engine Forum
http://www.351cleveland.net


Statesmen will invent cheap lies, putting blame upon the nation that is
attacked, and every man will be glad of those conscience-soothing
falsities, and will diligently study them, and refuse to examine any
refutations of them; and thus he will by and by convince himself that
the war is just, and will thank God for the better sleep he enjoys
after this process of grotesque self-deception.- Mark Twain

"Voice or no voice, the people can always be brought to do the bidding
of the leaders. That is easy. All you have to do is tell them they are
being attacked, and denounce the peacemakers for lack of patriotism and
exposing the country to danger. It works the same in any country." -
Hermann Goering

"We don't go out and hire journalists and propagandize and lie and put
people on payroll so that they'll say what you want."--Donald Rumsfeld,
12/24/2004


  Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.hi-po.big-block-ford-mercury



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 12:43.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.