Links page editing progress - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Forum Ford Forum

» Auto Insurance
» Featured Product
ยป Wheel & Tire Center

Go Back   Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.hi-po.big-block-ford-mercury
Register Home Forum Active Topics Photo Gallery Auto Loans Garage Mark Forums Read Auto Escrow

FordForums.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 01-07-2006, 16:01   #1 (permalink)
Wound Up
Guest
 
Posts: n/a
Links page editing progress

After 2 1/2 tedious hours, I have made it ALL the way through:

"Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
Information." Now that I think about it, that label is just plain ugly,
so I'm changing it.

Anyone need to get to sleep? Grab yourself a section, and post a list
of its broken links.

This is going to take a while. Man, do I need DSL!

--
Wound Up
ThunderSnake #65

AHPBBFM posting rules: http://tinyurl.com/ak694
AHPBBFM links page: http://tinyurl.com/a9qsx

  Reply With Quote
Sponsored Links
Advertisement
 
Old 01-07-2006, 18:01   #2 (permalink)
Jason
Guest
 
Posts: n/a
Re: Links page editing progress

You're outa your mind. I'll start scoping from the bottom up on Sunday and
spit ya a list

--
>>Jason

TS 47


"Wound Up" <none@your.disposal> wrote in message
news:43C05197.6070307@your.disposal...
> After 2 1/2 tedious hours, I have made it ALL the way through:
>
> "Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
> Information." Now that I think about it, that label is just plain ugly,
> so I'm changing it.
>
> Anyone need to get to sleep? Grab yourself a section, and post a list
> of its broken links.
>
> This is going to take a while. Man, do I need DSL!
>
> --
> Wound Up
> ThunderSnake #65
>
> AHPBBFM posting rules: http://tinyurl.com/ak694
> AHPBBFM links page: http://tinyurl.com/a9qsx
>



  Reply With Quote
Old 01-07-2006, 18:01   #3 (permalink)
Wound Up
Guest
 
Posts: n/a
Re: Links page editing progress

I know I am, but thanks for your help! =)

Jason wrote:
> You're outa your mind. I'll start scoping from the bottom up on Sunday and
> spit ya a list
>
> --
>
>>>Jason

>>

> TS 47
>
>
> "Wound Up" <none@your.disposal> wrote in message
> news:43C05197.6070307@your.disposal...
>
>>After 2 1/2 tedious hours, I have made it ALL the way through:
>>
>>"Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
>>Information." Now that I think about it, that label is just plain ugly,
>>so I'm changing it.
>>
>>Anyone need to get to sleep? Grab yourself a section, and post a list
>>of its broken links.
>>
>>This is going to take a while. Man, do I need DSL!
>>
>>--
>>Wound Up
>>ThunderSnake #65
>>
>>AHPBBFM posting rules: http://tinyurl.com/ak694
>>AHPBBFM links page: http://tinyurl.com/a9qsx
>>

>
>
>



--
Wound Up
ThunderSnake #65

AHPBBFM posting rules: http://tinyurl.com/ak694
AHPBBFM links page: http://tinyurl.com/a9qsx

  Reply With Quote
Old 01-07-2006, 20:01   #4 (permalink)
351CJ
Guest
 
Posts: n/a
Re: Links page editing progress


"Wound Up" <none@your.disposal> wrote in message
news:43C05197.6070307@your.disposal...
> After 2 1/2 tedious hours, I have made it ALL the way through:
>
> "Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
> Information." Now that I think about it, that label is just plain ugly,
> so I'm changing it.
>
> Anyone need to get to sleep? Grab yourself a section, and post a list of
> its broken links.
>
> This is going to take a while. Man, do I need DSL!
>
> --
> Wound Up
> ThunderSnake #65
>
> AHPBBFM posting rules: http://tinyurl.com/ak694
> AHPBBFM links page: http://tinyurl.com/a9qsx



You do know that they make software for that don't you?
Here are a few places to try.

Xenu's Link Sleuth
http://home.snafu.de/tilman/xenulink.html

WebXM Quality
http://www.watchfire.com/products/de...g/default.aspx

LinkScan 11.5
http://www.elsop.com/linkscan/

LinkAlarm
http://www.linkalarm.com/

Web Link Validator
http://www.relsoftware.com/wlv/

Another solution, although not my favorite.
http://www.netmechanic.com/


  Reply With Quote
Old 01-07-2006, 21:01   #5 (permalink)
John
Guest
 
Posts: n/a
Re: Links page editing progress

"Wound Up" <none@your.disposal> wrote in message
news:43C05197.6070307@your.disposal...
> After 2 1/2 tedious hours, I have made it ALL the way through:
>
> "Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
> Information." Now that I think about it, that label is just plain ugly,
> so I'm changing it.
>
> Anyone need to get to sleep? Grab yourself a section, and post a list of
> its broken links.
>
> This is going to take a while. Man, do I need DSL!


Jason,

If 351CJ's suggestion doesn't lead to some freeware, I can help, but with
more than 2 doing it we need some organization. Tell me which sections to
do.

--
John - ThunderSnake #59
'69 Mach 1 w/ 390 4V
Wide Ratio Toploader
3.50 Traction-Lok
Acapulco Blue



  Reply With Quote
Old 01-07-2006, 22:01   #6 (permalink)
Wound Up
Guest
 
Posts: n/a
Re: Links page editing progress

John wrote:
> "Wound Up" <none@your.disposal> wrote in message
> news:43C05197.6070307@your.disposal...
>
>>After 2 1/2 tedious hours, I have made it ALL the way through:
>>
>>"Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
>>Information." Now that I think about it, that label is just plain ugly,
>>so I'm changing it.
>>
>>Anyone need to get to sleep? Grab yourself a section, and post a list of
>>its broken links.
>>
>>This is going to take a while. Man, do I need DSL!

>
>
> Jason,
>
> If 351CJ's suggestion doesn't lead to some freeware, I can help, but with
> more than 2 doing it we need some organization. Tell me which sections to
> do.
>


Cool, man! Just grab one near the bottom, of a manageable size, and let
everyone know which it is, so there is no duplication of effort.

I will d/l one of the tools 351CJ suggested tomorrow, and let you know
as soon as I do how effective it is etc., to the same end.

--
Wound Up
ThunderSnake #65

AHPBBFM posting rules: http://tinyurl.com/ak694
AHPBBFM links page: http://tinyurl.com/a9qsx

  Reply With Quote
Old 01-07-2006, 22:01   #7 (permalink)
John
Guest
 
Posts: n/a
Re: Links page editing progress

"Wound Up" <none@your.disposal> wrote in message
news:43C0A45D.2080301@your.disposal...
> John wrote:
>> "Wound Up" <none@your.disposal> wrote in message
>> news:43C05197.6070307@your.disposal...
>>
>>>After 2 1/2 tedious hours, I have made it ALL the way through:
>>>
>>>"Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
>>>Information." Now that I think about it, that label is just plain ugly,
>>>so I'm changing it.
>>>
>>>Anyone need to get to sleep? Grab yourself a section, and post a list of
>>>its broken links.
>>>
>>>This is going to take a while. Man, do I need DSL!

>>
>>
>> Jason,
>>
>> If 351CJ's suggestion doesn't lead to some freeware, I can help, but with
>> more than 2 doing it we need some organization. Tell me which sections
>> to do.
>>

>
> Cool, man! Just grab one near the bottom, of a manageable size, and let
> everyone know which it is, so there is no duplication of effort.
>
> I will d/l one of the tools 351CJ suggested tomorrow, and let you know as
> soon as I do how effective it is etc., to the same end.


Otay!

--
John - ThunderSnake #59
'69 Mach 1 w/ 390 4V
Wide Ratio Toploader
3.50 Traction-Lok
Acapulco Blue



  Reply With Quote
Old 01-07-2006, 22:01   #8 (permalink)
John
Guest
 
Posts: n/a
Re: Links page editing progress

I recommend www.tucows.com/

--
John - ThunderSnake #59
'69 Mach 1 w/ 390 4V
Wide Ratio Toploader
3.50 Traction-Lok
Acapulco Blue

"Wound Up" <none@your.disposal> wrote in message
news:43C0A45D.2080301@your.disposal...
> John wrote:
>> "Wound Up" <none@your.disposal> wrote in message
>> news:43C05197.6070307@your.disposal...
>>
>>>After 2 1/2 tedious hours, I have made it ALL the way through:
>>>
>>>"Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
>>>Information." Now that I think about it, that label is just plain ugly,
>>>so I'm changing it.
>>>
>>>Anyone need to get to sleep? Grab yourself a section, and post a list of
>>>its broken links.
>>>
>>>This is going to take a while. Man, do I need DSL!

>>
>>
>> Jason,
>>
>> If 351CJ's suggestion doesn't lead to some freeware, I can help, but with
>> more than 2 doing it we need some organization. Tell me which sections
>> to do.
>>

>
> Cool, man! Just grab one near the bottom, of a manageable size, and let
> everyone know which it is, so there is no duplication of effort.
>
> I will d/l one of the tools 351CJ suggested tomorrow, and let you know as
> soon as I do how effective it is etc., to the same end.
>
> --
> Wound Up
> ThunderSnake #65
>
> AHPBBFM posting rules: http://tinyurl.com/ak694
> AHPBBFM links page: http://tinyurl.com/a9qsx
>



  Reply With Quote
Old 01-08-2006, 07:01   #9 (permalink)
Wound Up
Guest
 
Posts: n/a
Re: Links page editing progress

351CJ wrote:
> "Wound Up" <none@your.disposal> wrote in message
> news:43C05197.6070307@your.disposal...
>
>>After 2 1/2 tedious hours, I have made it ALL the way through:
>>
>>"Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
>>Information." Now that I think about it, that label is just plain ugly,
>>so I'm changing it.
>>
>>Anyone need to get to sleep? Grab yourself a section, and post a list of
>>its broken links.
>>
>>This is going to take a while. Man, do I need DSL!
>>
>>--
>>Wound Up
>>ThunderSnake #65
>>
>>AHPBBFM posting rules: http://tinyurl.com/ak694
>>AHPBBFM links page: http://tinyurl.com/a9qsx

>
>
>
> You do know that they make software for that don't you?
> Here are a few places to try.
>
> Xenu's Link Sleuth
> http://home.snafu.de/tilman/xenulink.html
>
> WebXM Quality
> http://www.watchfire.com/products/de...g/default.aspx
>
> LinkScan 11.5
> http://www.elsop.com/linkscan/
>
> LinkAlarm
> http://www.linkalarm.com/
>
> Web Link Validator
> http://www.relsoftware.com/wlv/
>
> Another solution, although not my favorite.
> http://www.netmechanic.com/
>


Thanks! I will get one of these tools to help reduce the tedium of this
process.

I just tend to take the "DIY" method with things....

Grazie

--
Wound Up
ThunderSnake #65

AHPBBFM posting rules: http://tinyurl.com/ak694
AHPBBFM links page: http://tinyurl.com/a9qsx

  Reply With Quote
Old 01-08-2006, 16:01   #10 (permalink)
Nosey
Guest
 
Posts: n/a
Re: Links page editing progress

Wound Up wrote:
> 351CJ wrote:
>> "Wound Up" <none@your.disposal> wrote in message
>> news:43C05197.6070307@your.disposal...
>>
>>> After 2 1/2 tedious hours, I have made it ALL the way through:
>>>
>>> "Tools & Equipment - WPSLPGExhaust Gas Information (EGO) sensor
>>> Information." Now that I think about it, that label is just plain
>>> ugly, so I'm changing it.
>>>
>>> Anyone need to get to sleep? Grab yourself a section, and post a
>>> list of its broken links.
>>>
>>> This is going to take a while. Man, do I need DSL!
>>>
>>> --
>>> Wound Up
>>> ThunderSnake #65
>>>
>>> AHPBBFM posting rules: http://tinyurl.com/ak694
>>> AHPBBFM links page: http://tinyurl.com/a9qsx

>>
>>
>>
>> You do know that they make software for that don't you?
>> Here are a few places to try.
>>
>> Xenu's Link Sleuth
>> http://home.snafu.de/tilman/xenulink.html
>>
>> WebXM Quality
>> http://www.watchfire.com/products/de...g/default.aspx
>>
>> LinkScan 11.5
>> http://www.elsop.com/linkscan/
>>
>> LinkAlarm
>> http://www.linkalarm.com/
>>
>> Web Link Validator
>> http://www.relsoftware.com/wlv/
>>
>> Another solution, although not my favorite.
>> http://www.netmechanic.com/
>>

>
> Thanks! I will get one of these tools to help reduce the tedium of
> this process.
>
> I just tend to take the "DIY" method with things....
>
> Grazie


I sent you an e-mail some time back with all the dead links. I used Xenu's
link slueth. It works very well but it may take some time on dialup. I can
run it again on the links page and e-mail the results to you again if you
want me to.
--
Ken
ThunderSnake #51


  Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.hi-po.big-block-ford-mercury



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 10:45.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.