66 6F HCS

Anybody have this software? Wondering if anyone might be willing to run some
numbers for me. The engine is OT even though it's bigger now than some "on
topic" motors.

--
Scott W.
'66 HCS Mustang 289
'68 Ranchero 500 302
'69 Mustang Sportsroof 351W
ThunderSnake #57
http://home.comcast.net/~vanguard92/

 

Dodge-Him

I do. post all your specs and I mean anything you can think of, header
size and length, carb, cam @.050 and lift and centerline (lobe
separation) what kind of rockers and ratio. Bore stroke compression,
what. stock lightweight or reduced weight pistons. rods and length.
What heads, head year and numbers and valve sizes. ported and how mild,
medium, full. flow numbers or good honest estimates if not stock Intake
and design (as stock dual plane or street aluminum dual plane race dual
plane and so on.
What your running in way of belt driven stuff like fan, water pump,
alternator, and Power steering. or you can have the gross number without
any parasitic loss (or both??)

then any parameters you want like add bigger carb, different cams and
such and I'll see what I can do!

Might be real busy till monday .
going racing tomorrow!
Dodgem


66 6F HCS wrote:

> Anybody have this software? Wondering if anyone might be willing to run some
> numbers for me. The engine is OT even though it's bigger now than some "on
> topic" motors.
>

66 6F HCS

"Dodge-Him" <Hemi'sRule@Dodgeland.ca> wrote in message
news:OMydnWHA8-qrxODfRVn-pQ@rogers.com...
>I do. post all your specs...

Should I send'em to you directly? I don't really wanna post my OT engine
specs here if it'll tick anybody off. Lemme know where to send them and
they'll be on the way ASAP.
--
Scott W.
'66 HCS Mustang 289
'68 Ranchero 500 302
'69 Mustang Sportsroof 351W
ThunderSnake #57
http://home.comcast.net/~vanguard92/

Dodge-Him

Dodgeboy88888888@yahoo.ca

66 6F HCS wrote:

> "Dodge-Him" <Hemi'sRule@Dodgeland.ca> wrote in message
> news:OMydnWHA8-qrxODfRVn-pQ@rogers.com...
>
>>I do. post all your specs...
>
>
> Should I send'em to you directly? I don't really wanna post my OT engine
> specs here if it'll tick anybody off. Lemme know where to send them and
> they'll be on the way ASAP.

66 6F HCS

"Dodge-Him" <Hemi'sRule@Dodgeland.ca> wrote
> Dodgeboy88888888@yahoo.ca

It's been sent. Hope I put in everything you'll need. If not, lemme know and
I'll try to get it.
--
Scott W.
'66 HCS Mustang 289
'68 Ranchero 500 302
'69 Mustang Sportsroof 351W
ThunderSnake #57
http://home.comcast.net/~vanguard92/

Dodge-Him

Looks like everything I need!
I'll try and do some on Monday!
any links to where i can see those heads.

I can but in 70 deg F . 50% (more or less) humidity 29.6" and 5200
feet if thats the results you want or standard dyno sea levels numbers.
or both for that matter.
if the return address to my yahoo address is good i'll scan the results
and send them to you as printable pictures!
Later
Dodgem

66 6F HCS wrote:
> "Dodge-Him" <Hemi'sRule@Dodgeland.ca> wrote
>
>>Dodgeboy88888888@yahoo.ca
>
>
> It's been sent. Hope I put in everything you'll need. If not, lemme know and
> I'll try to get it.

66 6F HCS

"Dodge-Him" <Hemi'sRule@Dodgeland.ca> wrote
> any links to where i can see those heads.

http://www.airflowresearch.com/ Click on the "Small block Ford" link and
then on "185cc Non-Emission Legal".
The Ford GT-40X Heads are here...
http://www.fordracingparts.com/parts...tKeyField=2601

Though I'd REALLY love to have THESE!! But not for $3000+ !!!NOT!!!
http://www.araoengineering.com/Ford/frdsmb.htm

> I can but in 70 deg F . 50% (more or less) humidity 29.6" and 5200 feet
> if thats the results you want or standard dyno sea levels numbers. or both
> for that matter.

Both if easy enough, I'm most interested in real world numbers here in
Denver though.

> if the return address to my yahoo address is good i'll scan the results
> and send them to you as printable pictures!

That address is good, the one with "TA" in it at Comcast.net

> Later

Thanx!
--
Scott W.
'66 HCS Mustang 289
'68 Ranchero 500 302
'69 Mustang Sportsroof 351W
ThunderSnake #57
http://home.comcast.net/~vanguard92/

Dodge-Him

I'll run some numbers of tomorrow night! Just got back from the track!
need a bath and sleep, golf tomorrow and address some leaks on the car.
May have to pull my trans again. new front seal, bushing and rebuilt
torque (so all new) and I have a front leak. I've had this before when
everything is done right it grabs the bushing and spins it!!!
Dodgem

Takes seconds to change the weather and altitude once initial engine is
built. Off hand for a stroker the cam looks mild so will be real torquey!
Dodgem

66 6F HCS wrote:
> "Dodge-Him" <Hemi'sRule@Dodgeland.ca> wrote
>
>>any links to where i can see those heads.
>
>
> http://www.airflowresearch.com/ Click on the "Small block Ford" link and
> then on "185cc Non-Emission Legal".
> The Ford GT-40X Heads are here...
> http://www.fordracingparts.com/parts...tKeyField=2601
>
> Though I'd REALLY love to have THESE!! But not for $3000+ !!!NOT!!!
> http://www.araoengineering.com/Ford/frdsmb.htm
>
>
>>I can but in 70 deg F . 50% (more or less) humidity 29.6" and 5200 feet
>>if thats the results you want or standard dyno sea levels numbers. or both
>>for that matter.
>
>
> Both if easy enough, I'm most interested in real world numbers here in
> Denver though.
>
>
>>if the return address to my yahoo address is good i'll scan the results
>>and send them to you as printable pictures!
>
>
> That address is good, the one with "TA" in it at Comcast.net
>
>
>>Later
>
>
> Thanx!