|
Re: 2002 f250 7.3 hard to start
On Sat, 12 Mar 2005 03:43:03 GMT, "Tyrone" <Tyrone@innercity.net>
wrote:
>
>"Chris Hill" <hillco@earthlink.net> wrote in message
>news:t3b331l2c5v804v869np85v6urpb19g8if@4ax.com...
>> On Fri, 11 Mar 2005 05:30:21 GMT, "Tyrone" <Tyrone@innercity.net>
>> wrote:
>> >>
>> >> It is held on by two bolts, and located on the left front of the
>> >> flywheel as you're looking at it. Unless the bolts are completely
>> >> froze up, it shouldn't take more than about ten minutes to change.
>> >>
>> >>
>> >
>> >And that 10 minutes includes a 5 minute coffee break.
>>
>>
>> I wouldn't know. I broke two sockets trying to get the f******* bolts
>> off. After a I couldn't get enough torque on a wrench and lost a
>> third socket in the gravel driveway I paid too much to have somebody
>> else fight with it. Hopefully it'll be easier next time, I carry one
>> in the glove box just in case.
>
>Next time put a little Kroil on the problem bolt and tap it lightly with
>a small ball peen hammer.
I'll try it, anything beats the price I paid.
|
Linear Mode
