trekiejim@webtv.net

How do I get the pump out to exchange it with the pully in the way? 4.9L
with serpentine belt

Spdloader

You'll need a "pulley puller". Take the pulley off first.

If you're near Thomasville NC you can borrow mine.

Spdloader



<trekiejim@webtv.net> wrote in message
news:12174-42D2C324-1094@storefull-3131.bay.webtv.net...
> How do I get the pump out to exchange it with the pully in the way? 4.9L
> with serpentine belt
>

lugnut

On Mon, 11 Jul 2005 12:06:12 -0700, trekiejim@webtv.net
wrote:

>How do I get the pump out to exchange it with the pully in the way? 4.9L
>with serpentine belt


If you buy the pump from someone like Autozone, they will
loan you the pulley remover/installer tool. It is not a
terribly expensive tool compared to the labor for a tech to
do the job. It is available from most parts houses. If you
have the plastic pulley, you can get a new one and use a nut
and bolt with a heavy washer to install it. The plastic
pulleys are cheap and are usually cracked anyway. Just use
a hammer to bust off the old one after you have the new one.

Lugnut