Ford Forum Ford Forum
Go Back   Ford Forums - Mustang Forum, Ford Trucks and Cars > Fordforums Community > USENET NewsGroups > alt.trucks.ford
Register Home Forum Active Topics Gallery Mark Forums Read


       
Ford Forums is the premier Ford Forum on the internet. We discuss all Ford models on the forum. Registered Users do not see the above ads. Please Register - It's Free!

ยป Wheel & Tire Center

» Search Used Cars
Search for used vehicles by ZIP, please enter Zipcode below:
Google Links

» Log in
User Name:

Password:

Not a member yet?
Register Now!
Sponsors

Sponsors

Reply
 
LinkBack Thread Tools Display Modes
Old 11-19-2005, 18:01   #1 (permalink)
suddenstranger@gmail.com
 
Posts: n/a
ford explorer 1998 - prob startging and shifting gears - help please

This car has some kind of with starting. When I first noticed it, the
car would not start after I tried starting smoke came out from the
hood, and I noticed that the negative power connector grounding cable
had melted. Then it wouldn't start. I replaced the grounding cable
and the battery connectors and the problem was no longer there. Then
yesterday the same problem. This time the positice side connector had
melted slightly and the car wouldn't start. It would just click and
then all the power in the car was gone. To get the power back all i
had to do was touch the + power side connection and it seems i would
ground it and the power would comeback to the car and the lights were
on. then try to turn over and it clicked and all power was gone. i
reoved the positive side connctor, meshed the thicker wire (to
alternator ?) and the ground (i think it goes to the ground, it
connects to the left side of the body on a little circular device
mounted on the car body) and once i wound the two wires together and
reconnected the partially melted battery connector the car started. it
always kinda has a slow turnover to begin with and then picks up speed
in turning over and starts. I'm afraid this will happen again. what
is the problem ?

also, the gears are very difficult to put into place. particular 1st
and 2nd but someties they are easy and other times i have to push real
hard to get the gears in. could it need lubrication ? what could be
causing this and why does it occur some of the time and rather than
always ?

thank you !

 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Reply


  Ford Forums - Mustang Forum, Ford Trucks and Cars > Fordforums Community > USENET NewsGroups > alt.trucks.ford



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -7. The time now is 05:56.

Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.1.0