need help for bronco 1987 4x4 - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
Ford Forum Ford Forum

» Auto Insurance
» Featured Product
ยป Wheel & Tire Center

Go Back   Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.trucks.ford
Register Home Forum Active Topics Photo Gallery Auto Loans Garage Mark Forums Read Auto Escrow

FordForums.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 08-09-2005, 08:01   #1 (permalink)
Patrice Barrette
Guest
 
Posts: n/a
need help for bronco 1987 4x4

hi all

i have a bronco 4x4 6 cyl. 2.9L with automatic locking hub ( just push a button on the celing )
and there is a kind of wiper motor on the transfer case that does the rest .

i would like to look the front hub so they are always lock and on 4x4

because i do snow removal at my home and the truck always stay on my land it does no go on the
street , and i think that with automatic looking hud they sometimes get unlock and that is not good
for me , but some one told me that it is possible to lock them for ever , by welding a part inside
them , because i dont whant to spend money to change the for manual one .

So is ther some one out there that could help in telling me how to weld the front hub , and the more
detaild the best , and if by any chance you have picture send them to me

my e-mail is patrice@hybride.com

thank's in advance for all your help , and have a nice day

patrice
  Reply With Quote
Sponsored Links
Advertisement
 
Old 08-09-2005, 08:01   #2 (permalink)
Mellowed
Guest
 
Posts: n/a
Re: need help for bronco 1987 4x4


I believe that it is possible to replace the autolocking hubs with a
manual locking hub. I would consider that a more favorable solution
that a permanently locked hub.

"Patrice Barrette" <patrice@hybride.com> wrote in message
news:C23Ke.46$nO.24@read2.cgocable.net...
: hi all
:
: i have a bronco 4x4 6 cyl. 2.9L with automatic locking hub ( just
push a button on the celing )
: and there is a kind of wiper motor on the transfer case that does the
rest .
:
: i would like to look the front hub so they are always lock and on 4x4
:
: because i do snow removal at my home and the truck always stay on my
land it does no go on the
: street , and i think that with automatic looking hud they sometimes
get unlock and that is not good
: for me , but some one told me that it is possible to lock them for
ever , by welding a part inside
: them , because i dont whant to spend money to change the for manual
one .
:
: So is ther some one out there that could help in telling me how to
weld the front hub , and the more
: detaild the best , and if by any chance you have picture send them to
me
:
: my e-mail is patrice@hybride.com
:
: thank's in advance for all your help , and have a nice day
:
: patrice


  Reply With Quote
Old 08-11-2005, 22:01   #3 (permalink)
Guest
 
Posts: n/a
Re: need help for bronco 1987 4x4

yep, best , cheapest and easy to do.
old john

"Mellowed" <nospam@newsgroups.com> wrote in message
news:mr3Ke.3117$Je.2498@newsread2.news.atl.earthlink.net...
>
> I believe that it is possible to replace the autolocking hubs with a
> manual locking hub. I would consider that a more favorable solution
> that a permanently locked hub.
>
> "Patrice Barrette" <patrice@hybride.com> wrote in message
> news:C23Ke.46$nO.24@read2.cgocable.net...
> : hi all
> :
> : i have a bronco 4x4 6 cyl. 2.9L with automatic locking hub ( just
> push a button on the celing )
> : and there is a kind of wiper motor on the transfer case that does the
> rest .
> :
> : i would like to look the front hub so they are always lock and on 4x4
> :
> : because i do snow removal at my home and the truck always stay on my
> land it does no go on the
> : street , and i think that with automatic looking hud they sometimes
> get unlock and that is not good
> : for me , but some one told me that it is possible to lock them for
> ever , by welding a part inside
> : them , because i dont whant to spend money to change the for manual
> one .
> :
> : So is ther some one out there that could help in telling me how to
> weld the front hub , and the more
> : detaild the best , and if by any chance you have picture send them to
> me
> :
> : my e-mail is patrice@hybride.com
> :
> : thank's in advance for all your help , and have a nice day
> :
> : patrice
>
>



  Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.trucks.ford



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 15:30.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.