Fred

After looking at the cooling lines I have discovered that they go from metal
tubing to rubber and then back to metal. One of the lines is leaking. I
think it is the rubber part but I can't see it because it is under the fan
shroud. Do you have to remove the fan to get to the line or is it just the
shroud with the two bolts at the top that has to be removed? Thanks for any
adivce. Fred.

lugnut

On Mon, 11 Jul 2005 21:14:34 GMT, "Fred"
<19481936@verizon.net> wrote:

>After looking at the cooling lines I have discovered that they go from metal
>tubing to rubber and then back to metal. One of the lines is leaking. I
>think it is the rubber part but I can't see it because it is under the fan
>shroud. Do you have to remove the fan to get to the line or is it just the
>shroud with the two bolts at the top that has to be removed? Thanks for any
>adivce. Fred.
>


If it leaking underneath, just crawl under it and remove the
splash shield to access that area. Removing the schroud
won't buy you muck work room.

Lugnut