Sven98

My '98 V-70 driver's door lock button is protruding through the door
tilted. I assume a screw holding it in place has come out. I need to
remove the door panel to investigate & repair. I don't have a manual.
Does anybody know the steps for removing the door panel. I've read in
previous posts that there are anywhere from 1 to 6 screws holding the
panel in place. How many are there, where are they, what's the
procedure?

Allan Shearer

Hey, looks like I'm not the only one! The same thing is happening on my
front-passenger door. It's not interfering with locking/un-locking of
the door, and it doesn't look too bad - so I wasn't going to do much
about it. But in case you find out that it's REALLY easy to fix, I'll
keep an eye on this discussion and might just do the same fix as you.

Yours,

Allan


.... and Sven98 spake, saying:
> My '98 V-70 driver's door lock button is protruding through the door
> tilted. I assume a screw holding it in place has come out. I need to
> remove the door panel to investigate & repair. I don't have a manual.
> Does anybody know the steps for removing the door panel. I've read in
> previous posts that there are anywhere from 1 to 6 screws holding the
> panel in place. How many are there, where are they, what's the
> procedure?
>

Glenn Klein

Sven98 wrote:
> My '98 V-70 driver's door lock button is protruding through the door
> tilted. I assume a screw holding it in place has come out. I need to
> remove the door panel to investigate & repair. I don't have a manual.
> Does anybody know the steps for removing the door panel. I've read in
> previous posts that there are anywhere from 1 to 6 screws holding the
> panel in place. How many are there, where are they, what's the
> procedure?
>
To Remove the door panel
1) Remove the cover that hides the mirror just gently pull off
2) In the recess for the door handle there is a small square cover
remove this cover behind the cover is a torx 25 screw remove this screw
3) the door panel is now held to the door skin by a series of clips
gently start @ a bottom conner & pull panel will come off as for the
master window switch you can either leave the connectors in or remove
them they only go in 1 way
Glenn
ASE Certified Automotive Technician
Volvo Master Technician

--
"*-344-*Never Forgotten"
Is for the New York City Firemen who lost their lives on September 11,2001.
The official count is 343, but there was also a volunteer who lost his life
aiding in the initial rescue efforts. And I will never forget them as
long as I live,
nor should any American.

Allan Shearer

Thanks for these great details, Glenn! Between you and Sven, I've now
got VERY clear instructions on how to fix this problem myself.

What a great newsgroup this is! I happen to be a l-o-n-g time member of
the 'Ventura Publisher' newsgroup which has always impressed me at being
very professional, kind, courteous, etc.... Looks like there's yet
another such newsgroup out there!

Thanks again.

Yours,

Allan Shearer


.... and Glenn Klein spake, saying:
> Sven98 wrote:
>
>> My '98 V-70 driver's door lock button is protruding through the door
>> tilted. I assume a screw holding it in place has come out. I need to
>> remove the door panel to investigate & repair. I don't have a manual.
>> Does anybody know the steps for removing the door panel. I've read in
>> previous posts that there are anywhere from 1 to 6 screws holding the
>> panel in place. How many are there, where are they, what's the
>> procedure?
>>
> To Remove the door panel
> 1) Remove the cover that hides the mirror just gently pull off
> 2) In the recess for the door handle there is a small square cover
> remove this cover behind the cover is a torx 25 screw remove this screw
> 3) the door panel is now held to the door skin by a series of clips
> gently start @ a bottom conner & pull panel will come off as for the
> master window switch you can either leave the connectors in or remove
> them they only go in 1 way
> Glenn
> ASE Certified Automotive Technician
> Volvo Master Technician
>

William MILLS

Here are some pics on how to do it

http://www.volvospeed.com/Repair/70_door.htm

Bill

"Allan Shearer" <allan@shearer.ca> wrote in message
news:ktE_d.72005$Jd2.1436086@news20.bellglobal.com...
> Thanks for these great details, Glenn! Between you and Sven, I've now got
> VERY clear instructions on how to fix this problem myself.
>
> What a great newsgroup this is! I happen to be a l-o-n-g time member of
> the 'Ventura Publisher' newsgroup which has always impressed me at being
> very professional, kind, courteous, etc.... Looks like there's yet
> another such newsgroup out there!
>
> Thanks again.
>
> Yours,
>
> Allan Shearer
>
>
> ... and Glenn Klein spake, saying:
>> Sven98 wrote:
>>
>>> My '98 V-70 driver's door lock button is protruding through the door
>>> tilted. I assume a screw holding it in place has come out. I need to
>>> remove the door panel to investigate & repair. I don't have a manual.
>>> Does anybody know the steps for removing the door panel. I've read in
>>> previous posts that there are anywhere from 1 to 6 screws holding the
>>> panel in place. How many are there, where are they, what's the
>>> procedure?
>>>
>> To Remove the door panel
>> 1) Remove the cover that hides the mirror just gently pull off
>> 2) In the recess for the door handle there is a small square cover remove
>> this cover behind the cover is a torx 25 screw remove this screw
>> 3) the door panel is now held to the door skin by a series of clips
>> gently start @ a bottom conner & pull panel will come off as for the
>> master window switch you can either leave the connectors in or remove
>> them they only go in 1 way
>> Glenn
>> ASE Certified Automotive Technician
>> Volvo Master Technician
>>