Martijn

My lightbulbs are failing one at a time. It's the bulbus behind the air
controls. Doe anyone know how to replace tham without damageing the dash.

Any advise is appreciated.

All the best,

Martijn
V40TD
240GL
262C
144DL

Erik Lidén

"Martijn" <jupiter@euronet.nl> skrev i meddelandet
news:d0ifso$sci$1@azure.qinip.net...
> My lightbulbs are failing one at a time. It's the bulbus behind the air
> controls. Doe anyone know how to replace tham without damageing the dash.
>
> Any advise is appreciated.
>
> All the best,
>
> Martijn
> V40TD
> 240GL
> 262C
> 144DL
>
>

If you have ECC, do like this:
1. Pull the knobs off, straight out.
2. Unscew all visible screws to get the panel off.
3. Change the bulbs.

If you don't have ECC I don't know if you does it this way.

/Erik Lidén

Martijn

Erik,

Thanks for your reply. I donnot have what you call "ECC", it's with knobs so
not electronic.
I did manage to remove the knobs but cannot reach the bulbs with "standard
articulated fingers" .

Any ideas?

Cheers,

Martijn


"Erik Lidén" <erik.liden.ingenspam@telia.com> wrote in message
news:Hb6Xd.131988$dP1.470899@newsc.telia.net...
>
> "Martijn" <jupiter@euronet.nl> skrev i meddelandet
> news:d0ifso$sci$1@azure.qinip.net...
>> My lightbulbs are failing one at a time. It's the bulbus behind the air
>> controls. Doe anyone know how to replace tham without damageing the dash.
>>
>> Any advise is appreciated.
>>
>> All the best,
>>
>> Martijn
>> V40TD
>> 240GL
>> 262C
>> 144DL
>>
>>
>
> If you have ECC, do like this:
> 1. Pull the knobs off, straight out.
> 2. Unscew all visible screws to get the panel off.
> 3. Change the bulbs.
>
> If you don't have ECC I don't know if you does it this way.
>
> /Erik Lidén
>
>