Re: Rust on S70 ignition key
H. Hovaness <firstname.lastname@example.org> wrote:
>The plating has worn off the side of my 98 S70 ignition key and rust
>is forming. What is the best remedy?
path1: assume that the plating on the key was poor. Has it "worn"
or "peeled/flaked" off? If worn, that is not very long for a key to
wear like that. I would make sue tha tthe locks are lubricated with
dry graphite (NEVER use a wet lube in a lock, no matter what the
can/bottle says). If flaked, then I would worry about where all those
bits of chrome went.
path 2: There is a problem with one of the cars's locks- presumably
the door or ignision lock that is wearing off the chrome.
path 3: You keep the key on a keyring next to other keys that are
wearing off the chrome as they rub together in your
If this is one of the later digital/chipped keys, they are expensive
Randy & \ \/ /alerie's
'90 245 Estate - '93 965 Estate
"Shelby" & "Kate"