Anyone want to buy a big trailer?
14'8" x 6'8" load bed, IIRC.
overall dimensions about 8'6"x 18', roughly. It's maximum width, anyway.
tilt/kneel bed for loading, works off a manual hydraulic pump. completely
level when loading, no ramp breakover, so it'll load things like citroens
with failed suspension...
4 wheeler, on 185R14C tyres. Plate on the side suggests it'll carry 1.5T,
but I've successfully hauled the 110 and 2 sorts of disco on it. Disco II
might not fit with the rear tailgate shut... 110 and disco I go on it with
about 1" to spare.
Tows on a NATO hitch at the lower height (level with 110 rear crossmember)
and I have an adapter for it which goes on the normal dixon-bate type
adjustable hitch rails - you need rails with 2" hole spacing and 4 holes for
this to work, as it uses the top and bottom holes.
For a 90/110 you can bolt the NATO hook to the crossmember direct.
cost me about 900 notes, ISTR. Offers around 500 will get serious
consideration. Can deliver.
If no-one bites it's going on eBay.
Austin Shackles. www.ddol-las.net
my opinions are just that
"You praise the firm restraint with which they write -_
I'm with you there, of course: They use the snaffle and the bit
alright, but where's the bloody horse? - Roy Campbell (1902-1957)