Fitting Warn 8274 to Disco 300Tdi Auto - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 10-14-05, 06:01 AM
Posts: n/a
Fitting Warn 8274 to Disco 300Tdi Auto

Hi as per the post I have a 8274 that I pulled off my series III prior to
flogging it. I am told that these are a little heavy for the disco front
suspension. Is this true? Would I have to install new springs?

The next concern is how badly installing one of these would affect my
cooling. I know removing it from my Nissan LD28 converted SerIIIS made a
huge improvement to the cooling and since most of the TDI ailments seem to
be overheating related, I am loath to loose any more cooling. I installed a
engine managment system and I have already had to replace the 95deg cooling
switch with a 105 deg one as the 95 deg one came on at the mere sight of a

If it is dooable, my final objection would be paying a fortune for a ARB,
TJM bumper etc. I would like to construct something myself that would get
the winch as low as possible and channel as much air as possible to the rad
without wrecking the looks too much.

Any Ideas?

Sponsored Links

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Ford Cars and PAG Vehicles > PAG Vehicle Discussion > Land Rover

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome