On Mon, 25 Apr 2005 11:14:12 GMT, "Ivordunnit via CarKB.com"
<forum@CarKB.com> wrote:
>Ok i'm sorry, one to many drinks, went out to the car to lock it and
>realised i left the lights on. Wrote the message straight afterwards still
>hammered and very pissed off. The lights on buzzer is not working, ie when
>i take the keys out and open the door. The interior lights work etc but no
>sound to let me know.
IMPORTANT INFORMATION
AUDIBLE WARNINGS
In some markets the vehicle specification
will include one or more of the following
audible warnings:
8< snip
’Lights on’ warning buzzer
If the lights are left on after the starter switch
is turned off, a warning buzzer will sound
when the driver’s door is opened. The buzzer
will cease as soon as the lights are switched
off or when the driver’s door is closed.
CIRCUIT OPERATION
Multi–Function Unit (MFU)
The multi–function unit (MFU) is mounted on the
rear of the passenger compartment fusebox and has
an input to operation of the following:
Heated rear screen
Heated front screen
Courtesy lights
Side and headlights
Rear fog guard lamps
Headlamp power wash
Front wipers
Rear wash/wipe
Diagnostic Procedure
1. Close all doors and the tailgate.
NOTE: If the oil pressure switch goes open circuit
(engine is started) during the following procedure,
the MFU will exit the diagnostic mode immediately.
2. Press and hold the heated rear screen switch
and switch on the ignition.
3. Release the heated rear screen switch within 2
seconds and the MFU will beep to indicate that it’s in
diagnostic mode 1.
4. Press the heated rear screen switch; the MFU
will beep twice. In turn, operate each of the following
switches, heated front screen, rear fog guard lamps,
side lights, headlights, front wiper, and rear wiper.
The MFU will beep twice each time a switch is oper-ated.
5. Pressing the heated rear screen again will cause
the MFU to enter diagnostic mode 2.
6. The MFU will provide outputs to the following in
order given below:
Heated rear screen relay energised for 2 seconds
Heated front screen energised for 2 seconds
Courtesy lights energised for 2 seconds
Dim dip relay energised for 2 seconds
Rear fog guard lamp energised for 2 seconds
Headlamp power wash energised for half a second
Front wiper energised for half a second
Rear wipe/wash energised for half a second
7. The MFU will then exit the diagnostic mode.
--
ColonelTupperware,
spouting bollocks on Usenet since 1997
Usenet FAQ at
http://www.its.caltech.edu/its/servi...ws/news2.shtml
UPCE FAQ at
http://upce.org.uk/ UKRM FAQ at
http://www.ukrm.net/faq/
Linear Mode
