Pacman

Silly question time...

How do you program the memory seats in a Classic RR? There's a "1" and "2"
button on it, and a green button too, but I've no idea on how to program
each memory. The manual doesn't cover it, and I can't find owt on internet.

--
Thanks,
Paul
--------------------
1992 RRC Vogue SE

Richard Brookman

so Pacman was, like...
> Silly question time...
>
> How do you program the memory seats in a Classic RR? There's a "1"
> and "2" button on it, and a green button too, but I've no idea on how
> to program each memory. The manual doesn't cover it, and I can't
> find owt on internet.

Can't speak for the RRC, but on the P38, the routine is - set seat & mirror
positions, press button 1, press and hold large button (perhaps equivalent
of your green button) untilo you hear a beep. Then pressing button 1 will
always restore those positions. Same for button 2. RRC may be similar.

HTH


--
Rich
==============================
Disco 300 Tdi auto
S2a 88" SW
Tiggrr (V8 trialler)

Richard Brookman

so Richard Brookman was, like...
> so Pacman was, like...
>> Silly question time...
>>
>> How do you program the memory seats in a Classic RR? There's a "1"
>> and "2" button on it, and a green button too, but I've no idea on how
>> to program each memory. The manual doesn't cover it, and I can't
>> find owt on internet.
>
> Can't speak for the RRC, but on the P38, the routine is - set seat &
> mirror positions, press button 1,

***keep it pressed, and at the same time***

> press and hold large button
> (perhaps equivalent of your green button) untilo you hear a beep. Then
> pressing button 1 will always restore those positions. Same for
> button 2. RRC may be similar.
> HTH

Oops - missed a bit out (above).
--
Rich
==============================
Disco 300 Tdi auto
S2a 88" SW
Tiggrr (V8 trialler)

Pacman

"Richard Brookman" <newsboy@nowhere.com> wrote in message
news:3nrvf1F328a3U1@individual.net...
> so Richard Brookman was, like...
>> so Pacman was, like...
>>> Silly question time...
>>>
>>> How do you program the memory seats in a Classic RR? There's a "1"
>>> and "2" button on it, and a green button too, but I've no idea on how
>>> to program each memory. The manual doesn't cover it, and I can't
>>> find owt on internet.
>>
>> Can't speak for the RRC, but on the P38, the routine is - set seat &
>> mirror positions, press button 1,
>
> ***keep it pressed, and at the same time***
>
>> press and hold large button
>> (perhaps equivalent of your green button) untilo you hear a beep. Then
>> pressing button 1 will always restore those positions. Same for
>> button 2. RRC may be similar.
>> HTH
>
> Oops - missed a bit out (above).
> --
Thanks, I'll try that.


--
Thanks,
Paul
--------------------
1992 RRC Vogue SE