Ford Forums banner

Tyre pressures

1K views 2 replies 0 participants last post by  Austin Shackles 
G
#1 ·
I have BFG A/T t/a on my V8 90. Size is 31x10.5r15. Its used mainly on the
road and not towing or carrying heavy loads. Anyone know what the pressures
should be.

Thanks
Richard
 
G
#2 ·
Richard wrote:
> I have BFG A/T t/a on my V8 90. Size is 31x10.5r15. Its used mainly on the
> road and not towing or carrying heavy loads. Anyone know what the pressures
> should be.


I run the same tyres on my Series LR at 32psi - that's probably a wee
bit high (especially at the rear if unladen) but I get too much sidewall
movement at lower pressures.


--
EMB
 
G
#3 ·
On or around Wed, 26 Oct 2005 10:00:20 +1300, EMB <embtwo@gmail.com>
enlightened us thusly:

>Richard wrote:
>> I have BFG A/T t/a on my V8 90. Size is 31x10.5r15. Its used mainly on the
>> road and not towing or carrying heavy loads. Anyone know what the pressures
>> should be.

>
>I run the same tyres on my Series LR at 32psi - that's probably a wee
>bit high (especially at the rear if unladen) but I get too much sidewall
>movement at lower pressures.


sounds about right. I used 34 all round in light running with those size
tyres on the 110.
--
Austin Shackles. www.ddol-las.net my opinions are just that
Confidence: Before important work meetings, boost your confidence by
reading a few pages from "The Tibetan Book of the Dead"
from the Little Book of Complete B***ocks by Alistair Beaton.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top