The Ford 351 Windsor & Cleveland Engine Specs - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
 
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 12-10-10, 09:33 AM Thread Starter
Registered User
 
Sterling_Six's Avatar
 
Join Date: Aug 2008
Location: Green Bay, WI
Posts: 1,135
Read The Ford 351 Windsor & Cleveland Engine Specs

The Ford 351 Windsor & Cleveland Engine Specs

Author: Ford Information (more...)
Ford 351 V-8 Engines
351 "C" 4V
1970-1973
Cleveland351 "W" 4V
1969
Windsor351 "R" 4V
1971-1972
Boss 351-HO351 "H" 2V
1969-73Engine Type8 cylinder
90 degree,
Overhead Valves (OHV)8 cylinder
90 degree,
Overhead Valves (OHV)8 cylinder
90 degree,
Overhead Valves (OHV)8 cylinder
90 degree,

Overhead Valves (OHV)Displacement351 cu.inches (CID)351 cu.inches (CID)351 cu.inches (CID)351 cu.inches (CID)Maximum torque
380 lbs./ft. @ 3,400 RPM


380 lbs./ft. @ 3,400 RPM370 lbs./ft. @ 4,000 RPM
(1971) 275 lbs./ft. @ 6,000 RPM
(1972)
355 lbs./ft. @ 2,600 RPM Maximum Horsepower300 BHP @ 5,400 RPM300 BHP @ 5,400 RPM
330 BHP @ 5,400 RPM
(1971)

275 BHP @ 6,000 RPM
(1972) 250 BHP @ 4,600 RPM
(1969-70)
177 BHP @ 4,600 RPM
(1971-73) Firing Order1-3-7-2-6-5-4-8
(Number 1 cylinder on right bank, nearest radiator)1-3-7-2-6-5-4-8
(Number 1 cylinder on right bank, nearest radiator)1-3-7-2-6-5-4-8
(Number 1 cylinder on right bank, nearest radiator) 1-3-7-2-6-5-4-8
(Number 1 cylinder on right bank, nearest radiator) Bore & Stroke4.00" X 3.50"
(101.6 mm X 88.9 mm)4.00" X 3.50"
(101.6 mm X 88.9 mm)4.002" x 3.50"
(101.6 mm X 88.9 mm)4.00" X 3.50"
(101.6 mm X 88.9 mm)Compression Ratio11.0:111.0:111.5:1 (1971)


9.2:1 (1972) 9.51:1 Oil Pressure (hot)35 to 60 lbf/in235 to 60 lbf/in235 to 60 lbf/in2 35 to 60 lbf/in2 Mains2-bolt2-bolt4-bolt2-boltCarburetor
Autolite 4300-A (4V)


Squarebore



automatic choke

Autolite 4300-A (4V )
Squarebore

automatic choke Autolite 4300-D (4V)
Squarebore automatic choke
Size of CarburetorFuelpremium gaspremium gassuper premium (1971) premium gas (1972)
regular gas Intake Manifoldcast ironcast ironaluminum (1971) cast iron (1972)

cast iron Valve trainhydraulic liftershydraulic lifterssolid & adjustable liftershydraulic liftersIntake 2.185"-2.195"
2.185"-2.195"

2.184"-2.195""1.9025"-1.9175"Exhaust1.7045"-1.7145"1.7045"-1.7145"1.7045"-1.7145"1.533"-1.548"Distributorsingle point
vacuum advancesingle point
vacuum advancedual point
vacuum advancesingle point
vacuum advancePoint Gap.017"Initial Ignition Timing6 degreesDwell @ idle RPM24-29 (manual)
26-31 (auotmatic)Spark PlugsAutolite AF-42Autolite AF-42Autolite ARF-42Autolite ARF-42Spark Plug Gap.032"-.036"Long Block Weight
in lbs.530 530530530Emission ControlsIMCO (with Automatic, only NOx system)
California IMCO (with automatic, only)
other 49 states
IMCO (with Automatic, only NOx system)
California IMCO (with automatic, only)
other 49 states
NOx
CaliforniaIMCO (with Automatic, only NOx system)
California IMCO (with automatic, only)
other 49 states

RPM Rev Limiter6,050-6,150 RPM
1970 - The 351 engine was used in Mercury Cougars & Montegos as well as the Ford Mustangs and Torinos.
1970 1/2 - The Ford Falcons had an optional 351 engine.
1971 - The 351 was available for use in the Mercury Cougars & Montegos and the Ford Mustangs and Torinos.
1971-1973 - The HO (High Output) Boss 351 engine was used only in Mustangs. Introduced in December 1970 and was available until the model year 1972. The 1972 Mustang Boss 351's also had ram air.




BY THE NUMBERSPERFORMANCE UNLIMITED 358CI SMALL-BLOCK FORD Bore:4.030 inchesStroke:3.500 inchesDisplacement:358 cubic inchesCompression ratio:10.48:1Camshaft:COMP hydraulic, flat tappetCam duration:240/246 degrees at .050-inch tappet riseCam lobe lift:.360/.364 inchRocker ratio:COMP Magnum 1.6 ratioLobe separation:108 degreesInstalled centerline:102 degreesTop ring:1.2mm JETop ring gap:.020 inch Second ring:1.5mm JESecond ring gap:.022 inchOil ring:3mm JEPiston:JE, dished topBlock:OEM Ford 351WCrankshaft:OEM Ford 351W Rods:Eagle SIR 5.959-inch I-beamMain journal:2.620 inchesMain bearing clearance:.0022 inchRod journal:2.070 inchesRod bearing clearance:.0020 inchCylinder head:AFR 205 Peak intake flow:295 cfmIntake valve diameter:2.080 inchesExhaust valve diameter:1.600 inchesIntake manifold:Edelbrock Performer RPM Carburetor:Holley 4150 modified to 1,070 cfm by Charlie MorganHeader:Mac 1 3/4 Fox-body Windsor; 3-inch collector Ignition:MSD 6ALDamper:TCI RattlerWater pump:Meziere


DTS DYNO DATABEST QUALIFYING PULLRPMTQHP2,5003641732,6003741852,7003831972,8003932102,9004042233,0004132363,1004192473,2004232573 ,3004212653,4004162703,5004112743,6004102813,7004122903,8004183023,9004273174,0004393344,1004513524, 2004613694,3004693844,4004773994,5004814124,6004854254,7004864354,8004874454,9004884555,0004874645,1 004864725,2004864815,3004844885,4004814955,5004795025,6004775095,7004745155,8004705195,9004665246,00 04635296,1004575316,2004515326,3004455346,4004395356,500









































































































This page was created on August 31, 2000, it was last updated on Sunday, May 06, 2002 .
Information is from several Ford sources including Pat Ganahl's Ford Performance Engines.



<< Return to Previous Page

Good Luck and good repairing Sterling_6
"You know, just like in that Book, When Jesus beats up Moses to get Religion!!"
Sterling_Six is offline  
Sponsored Links
Advertisement
 
 

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > The Garage - Tech Forums > Do it Yourself - How-To > .
Gear in this thread - Powered by O'Reilly Auto Parts


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome