Ford Forums banner

Search results

1-20 of 81 Results
Advanced Search
  1. APS Phase 3 Kit on a XR6 Turbo

    F6 Typhoon | XR6 Turbo
    You could go to a tuner who tunes Ford edit and installs APS products. Autotech Engineering in sydney do this. Check out their website at www.autotechengineering.com.au
  2. Tell us about your XR6T Mods

    F6 Typhoon | XR6 Turbo
    yeah its not bad but you get used to it, at least in a straight line anyway. Driving through the twisties and its probably too much power. The APS stuff is the best on the market. Exceptionally well engineered. :hy:
  3. Boost gauge in fairmont clock holder for BA XR6T

    The Market Place Archives
    As seen here: Mint condition. It's the 20psi boost gauge. Reason for selling is I need a gauge for higher boost :dance: Brand new they are $340. Asking $150. Sydney area.
  4. Tell us about your XR6T Mods

    F6 Typhoon | XR6 Turbo
    Im also with a Phase 3 system, including exhaust, intercooler, air intake, together with unichip (does all the tuning) and edit for base map adjustments. Also have AP Racing brakes to pull it up :wtf2: Making around 350rwkw.
  5. APS Phase 3 Kit on a XR6 Turbo

    F6 Typhoon | XR6 Turbo
    Phase II is about $4500 installed. Phase III is another $4500 or 9K in total.
  6. Race fuels - Does the XRT benefit on the strip and Dyno?

    F6 Typhoon | XR6 Turbo
    C&V had stated to various publications including Motor Magazine that the car was stock Phase III apart from the removed cat due to race fuel. Can't say how much boost was applied as I don't know. As for phase III's not doing the same - they are tuned to a specific power level becasue that is...
  7. Race fuels - Does the XRT benefit on the strip and Dyno?

    F6 Typhoon | XR6 Turbo
    The car is the same as phase III. C&V just upped the amount of boost the car ran and used slicks to help get it off the line. Normal Phase III is tuned to 390kw at the flyhweel because this is the level of performance that APS had designed the system for. Having said that, you can choose to...
  8. Race fuels - Does the XRT benefit on the strip and Dyno?

    F6 Typhoon | XR6 Turbo
    It' was phase III apart from the removal of the cat (which would have been due to race fuel - no additional power gain would have been had). On top of that it was standard phase III with more boost. Yes, my car did 12.5 but I remeber yours did 12.3 on at WSID as well. And I've only got 5 runs...
  9. Race fuels - Does the XRT benefit on the strip and Dyno?

    F6 Typhoon | XR6 Turbo
    Don't write off the phase III system A blood orange Phase III car managed a 10 second run in sydney at over 30 degrees ambient temp with full street trim (including exhaust) That's a record I'd like to see broken :driver:
  10. XR6T New Exhaust

    F6 Typhoon | XR6 Turbo
    I know of one person who removed their cat at 250rwkw and gained 25rwkw. They then replaced the stock exhaust minus cat with the APS exhaust and gained another 10rwkw. If people think the stock exhaust isn't restrictive at 250rwkw then they need to do some more research :hy:
  11. Race fuels - Does the XRT benefit on the strip and Dyno?

    F6 Typhoon | XR6 Turbo
    It's a pity race fuel isn't $1.20 at the pump...
  12. BAXR8 Rear parcel shelf clunking (help)

    FPV & Tickford Forum
    Hi Andre Glad you got the problem fixed. Im still stuck with mine. What exactly was the problem? "pulled the thread out" - not sure what this is and why it makes a 'clicking' noise??? Who is your dealer? Perhaps I could contact them for more information... thanks
  13. WANTED!! Do you have a set of ROH Modena 19x8's for my XRT

    The Market Place Archives
    Yep that way you'll be sure that the brakes will fit :hy:
  14. WANTED!! Do you have a set of ROH Modena 19x8's for my XRT

    The Market Place Archives
    if you ever consider getting larger brakes you need to order them specifically from ROH with the correct offset. Learnt from experience on my part... :priest:
  15. APS Phase 3 Kit on a XR6 Turbo

    F6 Typhoon | XR6 Turbo
    345rwkw with 950nm and phase III. Not too much power for me :driver:
  16. APS Phase 3 Kit on a XR6 Turbo

    F6 Typhoon | XR6 Turbo
    I have phase III installed. Done by Autotech in Sydney. Car handles like a dream. The power is there when you want it - otherwise it can drive like a stock XR6T. Do it - you won't regret it :driver:
  17. Rods, Boss 290 Has Twin Turbo's

    FPV & Tickford Forum
    Excellent Time and MPH :hy: Indicative of around 330rwkw and at low boost too. Wind her up and smash all the records, Rod :driver:
  18. BA XR 18 rim + tyre (or not)

    The Market Place Archives
    Wanted 1 X BA XR 18inch rim. Doesn't matter if damaged with scuff marks etc. Sydney area. Can pickup :hy:
  19. BAXR8 Rear parcel shelf clunking (help)

    FPV & Tickford Forum
    Thanks for the input andre. Be sure to keep us up to date on how you go as we can attack ford head on about this now that it appears there are a few people with the same problem Do you have any mods done to your car like suspension or exhaust?
  20. GTPvTyphoon

    FPV & Tickford Forum
    Bolt on a twin turbo kit from APS and you'll make 400rwkw on stock internals. Typhoon can't touch this.
1-20 of 81 Results
Top