1996 351W stock cam event timing, lift, duration
1 - 2 of 2 Posts
Joined
·
20,289 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
302 Camshaft Fitting
Windsor TechSo I am putting a Felpro gasket set through a 302 (windsor) and find this unusual fitting. As I'm used to rekitting sbc and 360 mopar this seems weird. Someone has fitted the rollmaster double row chain kit and some unbranded 1.6 roller rockers, but this offset fitting seems to me like if would...- 2
- 80
-
Doug SwampRat · updated
-
1973 351w intake manifold vacuum question
Windsor TechSo I have a question in regards to my 351w intake manifold vacuum set up on my 1973 Mercury Montego. So I recently bought a new after market high rise intake, and I was looking over my stock 2 barrel one and noticed that the vacuum tree thing on the back of it that goes to the brake booster and...- 3
- 367
-
musicmatt6655 · updated
-
69 351W main bearing tab issues
Windsor TechHello all, I don't build engines everyday but have belt 20 or so over the years.. I have what seems to be a simple issue. After plenty of cleaning and detailing, I started to put my 1969 351w motor together. I installed the mains in the bock as normal. When I went to install the bearing in the...- 1
- 838
-
MP65fast · updated
-
84 - 87 351W H.O.
Windsor TechCan anyone here give me reliable information on the '84 - '87 351W H.O. engines that were in pickups. They had 4 barrel carbs. and were supposed to have a higher horsepower. Other forums say the heads were a problem and that they didn't have much if any advantage over the heads that would have...- 2
- 769
-
Unsolvable 351W starter motor problem!
Windsor TechHi Guys, I'm a Newbie to this great looking site and arrive with a drama nobody can explain.........l In my boat I have a 650 hour, marinised, twenty year old Ford 351 Windsor V8. Due to a cracked cylinder head, I had it rebuilt locally with a new head, pistons, rebore etc. etc. All went well...- 3
- 3K
Join now to ask and comment!