I'm rebuilding steering on my 1959 Mercury Monterey. The inner balljoints are installed through center or drag link instead of inner tie rod. Anyone know of where I can find replacement balljoints to rebuild drag link?
59 Mercury Inner Balljoints
1 - 4 of 4 Posts
Mac's:
www.macsautoparts.com
1949-1959 Late Ford & Mercury Tie Rod Parts - Macs Auto Parts
Late Ford & Mercury tie rod parts and Late Ford & Mercury tie rod ends. Trust MAC's for all your steering rod needs.
Mac's normally has what I need, but not the center/drag link or inner ball joint for 1959 Monterey. The inner ball joints are pressed into centerlink instead of inner tie rod for the 1959-1960 year. Parts are not as available for this model year.
May have to get creative with it.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Continental Designs Tomorrow’s Tire
Suspension | Wheels&Tires | Brakes"Conti C.A.R.E." delivers technology solutions for the mobility of the future Electrification and connectivity of wheels and tires enable sustainable tire management At this year’s Frankfurt Motor Show (IAA), Continental will be presenting Conti C.A.R.E., a comprehensive technology system...- 0
- 445
-
R.S.LOGAN · updated
-
Brake Replacement
Suspension | Wheels&Tires | BrakesI'm starting to notice vibration when I apply the brakes our 2016 Ford Edge SEL has about 55,000 miles. As I inspect the brake pads I noticed the inboard pads of the front brakes are worn down but not worn out more than the outboard pads and my rear rotors on the inboard side are Rusty on the...- 2
- 183
-
-
-
GM and Michelin will bring airless tires to passenger cars by 2024
Suspension | Wheels&Tires | Brakes- 0
- 182
-
R.S.LOGAN · updated
Join now to ask and comment!