[Bryan Clark]

Can anybody help?
Last year my car started missing so I bought and used an analyser which identified that I had a fault with either the exhaust gas analyser sensor or solenoid (fault code 327). I picked up replacements from a breakers and all was well until this week it has developed the same fault again. Was I just unlucky or is something else causing the problem. Anybody else had a similar problem or can offer advise?

 

[Big Block Ford]

Hi Bryan and welcome to the forum.How long did the repair last.It sounds to me as if it has developed the same fault.

 

[Bryan Clark]

I only carried out the repair (replaced the Exhaust Gas Sensor and Solenoid) about 12 months ago. The parts were secondhand but it still seems too much of a coincidence for one or other of the parts to fail again, particularly since I know of no other person who seems to have had the same fault.

 

[28s3]

Don't knock it Euro Ford solinoids aren't the best try an after market job as this may be better and of course last longer.

John
The Flying Haggis.

 

[28s3]

Oh forgot ??!!!

Hi there !!!!!

John
The Flying Haggis

 

[HSE2]

Hello Bryan and welcome. Hope you get it fixed.