Ford Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
Hey I was just wondering if anyone has ever had any experience with fitting the turbo setup from a BA XR6 onto an older model ford, namely an EF.

I was wanting to put it into an auto EF Fairmont, with a newly rebuilt engine

the parts I have are : Garret GT34/40 turbo,intercooler, intercooler piping, 28 lb injectors, boost gauge, oil guage,Aftermarket BOV, FORD EDIS6 module, narrowband oxy sensor, 6 module coil packs and a wolf 3D ver4 ECU,

I know I would also need an exhaust manifold, would there be anything else?

any ideas/help/experience/input would be much appreciated

Cheers
 

·
Registered
Joined
·
1,972 Posts
EABAturbo or someone with a similar name at www.www.fordforums.com put a stock BA turbo on a $200 wrecker-special EA S-pack, and they're currently pulling low 10s :D

BA intake manifold won't match up to E-series ports, so you're best off looking into a custom or aftermarket manifold.

-Dave-
 
1 - 2 of 2 Posts
Top