Ford Forums banner

1 - 3 of 3 Posts

·
ford butcher and baker
Joined
·
217 Posts
Discussion Starter #1
Hi,

Wondering what sort of cam to put into a windsor with 2V cleveland heads. The engine is fully rebuilt w/studs balanced to rev.

Thinking maybe a crane F238 solid lifter cam on the basis it has least lift and that the 1.7 roller rockers will provide extra lift...

cheers.
 
B

·
Guest
Joined
·
0 Posts
I like Crow cam with similar specs 15626? (run one now w 430hp 68windsor heads) gained full second over [email protected] hydro, lift is low at .510/.520 net w 1.6 rockers so w 1.7 piss it in, as long as U check piston to valve clearance, but clevo type heads with right (boss type) pistons give U lotsa room compared to stock windsor flatties).
 

·
ford butcher and baker
Joined
·
217 Posts
Discussion Starter #3
running flattops basically. I'll start there, and proceed with a lot of checking, of clearances. thanks for reply.
 
1 - 3 of 3 Posts
Top