[OED666]

Will EF XR Seats bolt straight into an ED???

OK CYA!!!

 

[EFFalcon]

rear seat yes, front seat needs modifying. (rails??)

 

[OED666]

would it be possible to put my existing rails on the ef seats??

 

[Walkinshaw]

crack out the welder, drill and some high tensile bolts and you can change the rails over yes.

 

[OED666]

so is that a yes to being able to only swap over the rails???

 

[ED GLI V8]

Heres a link that might give you a bit of help
http://www.eafalcon.com/techpages/modifications/elinterior/index.htm

 

[OED666]

thanks for that!!

hey soxx, have you had a chance to send those fotos yet??

if you want to email them to me, you can send them to

[email protected]

or

[email protected]

 

[OED666]

crack out the welder, drill and some high tensile bolts and you can change the rails over yes.

so can i just change over the rails only, and will it work??

so i mean take them off my existin seats and put them on the new ones???

 

[XRated]

If you're going to be screwing around with changing the rails and shit, don't you require an engineer's report?

 

[mongrelEB]

Bugger changing the rails, just cut a bit of metal pipe and stick it under the inside rear corner, that's all I did.
Course, I will get round to drilling another hole in the floor so I can put a 5-inch bolt down through the pipe Eventually.

 

[OblitzO]

What are EF XR seats worth?? Sounds like a good idea

 

[Walkinshaw]

I got an EF XR interior (seats door trims etc) for $300 ish. Wreckers will want $500+ though.

 

[EFFalcon]

a wrecked in melbourne wanted $300 for EF XR seats and 4 door trims.
no idea if its still there though