Ford Forums banner

121 - 139 of 139 Posts

·
Registered
Joined
·
9 Posts
xc fairmont 4 door 3800 lbs. 477ci bbf, c4 5000 stall with trans/b, 3.7:1, et street tyres, full exhaust and air cleaner fitted. 10.48 @ 129.578mph bad 60fts (ALL FORD NO CHEV SHIT HERE)
 

·
Registered
Joined
·
6 Posts
hi

Ford Performance Vehicles (commonly abbreviated to FPV) is the official high-performance arm of Ford Australia, replacing Tickford in this role with the introduction of the BA Falcon platform in 2002. FPV currently offers three sedan models (GT, GT-P and F6 Typhoon) and three ute models (Pursuit, Super Pursuit and F6 Tornado). The F6 models feature the Barra 270T turbocharged 6-cylinder engine, while the other models feature a higher-performance version of the Barra V8, known as the Boss 290.

Regards
Chronis Tsempelis
Marketraise Corp.

Suite 200 and 400,
41-A East Merrick Rd.,
Valley Stream,
NY 11580
Cell: 516-398-0996
Tel: 516 887 1929.

www.marketraise.com:priest:
 

·
Registered
Joined
·
596 Posts
just an update ran 11.20 @120mph last week at calder in my esp breaking up 3 qtr track
416w injected

hopefully go back out 2morw and ran a 10.80
 

·
Registered
Joined
·
58 Posts
6.20 at 110 in the eigth havent run the 1/4 yet my avatar is a pic of the car 351 w lil motor but have a 445 stroker windsor waitin for it
 

·
TuffZc and pursuit
Joined
·
301 Posts
ratter said:
My unopened pursuit has run a 12.23 and 114.68 mph

Should have updated this a while back to 11.76 @116.8 still unopened :driver:
 

·
Registered
Joined
·
3 Posts
:hy: my ute has ran 10.95 @121.49 its a 377 cid 4800 stallconverter 825 bg strip dominator 4v no tounges soild cam 12.1 comp 4.33 gears 2# prim on av gas XD377UTE 60foot 1.54
 
B

·
Guest
Joined
·
0 Posts
XP hartop, 306 windsor C8 factory block, stock crank and rods, twin turbo intercooled, AFR185's, blow through carb, stg2 C9/8 9 1/2" TCE convertor 31spline 9" 3.55 gears Detroit locker.
ran [email protected] on 235MT drag radials 1.71 60' 3400lbs, fluffy dice on mirror.....
 

·
Registered
Joined
·
16 Posts
I never noticed this thread here before.

I have run a 10.618 @ 129.38mph

Ford Cortina, 250 Crossflow turbo EFI, 14psi boost, C4 automatic, transbrake, TCE 4800 rpm converter, Borg Warner nine bolt LSD diff, 3.08 Gears, 26x8" Hoosier Slicks.

I have since revamped the whole car and hope to soon run into the 9's
 

·
Registered
Joined
·
19 Posts
460 stroker in a XE ute, it is all steel panels, lexcen windows, hat injection, methonol, dove heads, roller lifters, and rockers, c6 gear box, braced 9 inch, strange center, moser axles, 32x15 hoosiers.
tuning not complete yet, or 4 link adjustments, so there is room for big improvement yet.
flat 10 @ 135
 

·
Registered
Joined
·
32 Posts
Hi guys, I haven't raced since 2007 but I blew the cob webs off the old girl and ran it on Saturday night and she ran 8.75. We changed a few things since last time, narrower tire (10"), fitted the wagon rear seat, put straight cut gear in the box and gave it a little more NOS. Check out the link:
and then this happened:
. I hope you guys enjoy watching it as much as I enjoyed doing it!!

Oh in case you have never seen the car before, it's a street 1971 XY Falcon, un-tubbed, standard suspension, 29" x 10" slicks, muflers, full interior, all glass and mechinisms, all steel except for boot bonnet and bumbers, 3480lb.
 
121 - 139 of 139 Posts
Top