Ford Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
so i finally got my escort running but it wasnt firing on the third(third
from the left) cilundar so i thought maybe i hooked up the wires wrong
well i took off the wires while it was running *slaps myself so now it
wont start and nothing works it makes a clickign nose under the dash but
thats it lol I NEED HELP!!!! lol
 
G

·
Discussion Starter · #2 ·
>> well i took off the wires while it was running *slaps myself
>> so now it wont start and nothing works it makes a clickign
>> nose under the dash but thats it lol I NEED HELP!!!! lol


I wonder where all that voltage ran off to when you pulled the plug
wire?

Something caught it. Now you know...
 
G

·
Discussion Starter · #3 ·
I think you need to put at least a few of those wires back on in the
right place. A bit of research will tell you that those "cilundars"
(sic) have numbers that correspond to the firing order. If it really is
an escOrt there are only four wires and you could try various
combinations until you get it right. The longest wire goes to the
cylinder farthest away and the shortest wire goes to the closest. So
that just leaves you with the two middle cylinders to guess at. Those
are the 2nd and 3rd from the left. They are also the 2nd and 3rd from
the right!!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top