Ford Forums banner
1 - 3 of 3 Posts

·
Two SC 61's = trouble
Joined
·
6,360 Posts
Hi kelly.Go to www.summitracing.com For info.. Edelbrock have them part #EDL-7893 for Ford hydraulic roller cam.$209 U.S..Should be able to purchase here. I would go for Cloyes roller chain Part#CLO-9-3135 Give U.S Importers
[ex Performance wharehouse] a call 9607-2299 /264 Hoxton Pk Liverpool.Check out there 347 stuff while there. They do listen.I have hade no trouble with a True roller chain and I have F303 cam with 512 lift & double valve springs and as you know I give it some.Mine cost $80.00..Any cheaper is possibly rubbish..
 

·
Two SC 61's = trouble
Joined
·
6,360 Posts
Try Suburban Imports.They have aheap of the H.O motors I recon they'l have trouble selling them unless they are cheaper.Swap all your parts over..?I think they have some in [email protected] Winbourn Rd Brookvale Ph 9905-8288 good luck Kelly
 

·
Two SC 61's = trouble
Joined
·
6,360 Posts
Good to hear Henry is back on the road Kelly.Going well?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top