Ford Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,090 Posts
Discussion Starter #1
hey guys
i put my sound system in on thursday and now my car won't start
i leave it on for the 30 mins so smart lock can reset but when i turn it off and go to start it again it won't, it's got an add on arlarm on it so i wanna rip it out cause i need my car and there's no mobile auto elec in my area to help me out

can someone please help me as it's driving me insane

thanks jarrod
 

·
Registered
Joined
·
5,083 Posts
I had to do this the other week, it's easier than it seems.

First off, find the alarm unit itself, just trace all the wires out from that. Just rip them all out, resolder and heat shrink any wires that were seperated and you should be right.

Mine was tapped into the ignition circut, just had to pull the steering coloum apart and resolder the wire they tapped into. The rest were just tapped into the door/boot circuts (I think?), take out the driver's side kick panel and you should see them all.
 

·
Registered
Joined
·
1,090 Posts
Discussion Starter #3
i pull it out still won't start why why why the Fu%k not it start
 

·
#FAIRMONT GHIA#
Joined
·
216 Posts
hey jarrod,
what did u do when installing the new sound, did u just unplug the radio or did u cut some wires?
 

·
Banned
Joined
·
3,104 Posts
Fuses all good?
 

·
Registered
Joined
·
1,090 Posts
Discussion Starter #6
i cut the wires ,all the fuses are all good ,check about 10 times
 
1 - 6 of 6 Posts
Top