Ford Forums banner

1 - 9 of 9 Posts

·
Ford Forums Member
Joined
·
47 Posts
Discussion Starter #1
Does anyone know if a 2v exhaust manifold is the same as a standard 250 head?

Will the extractors on my 250 1v fit on a 250 2V head?

Thanks
 

·
Registered
Joined
·
146 Posts
Re: ANYONE THAT KNOWS ANYTHING ABOUT 250 2V's CLICK HERE PLEASE!

As far as I know it won't... could be wrong...
 

·
Registered
Joined
·
19 Posts
Re: ANYONE THAT KNOWS ANYTHING ABOUT 250 2V's CLICK HERE PLEASE!

:driver: A 250 2v head has a larger hole in the centre and a standard manifold won't fit over there is a gap top and bottom although the bolt pattern is the same you have to use the right gasket set Cheers
 

·
Ford Forums Member
Joined
·
47 Posts
Discussion Starter #7
Re: ANYONE THAT KNOWS ANYTHING ABOUT 250 2V's CLICK HERE PLEASE!

So will my standard 250 1v extractors fit my 2v head ok, with the right gasket?
Because i have got the special 2v gasket, and noticed ports 3 and 4 are a bit bigger.
If i do use my standard extractors with 2v gasket will the flow be sufficient enough?
 

·
Jesse
Joined
·
5 Posts
Re: ANYONE THAT KNOWS ANYTHING ABOUT 250 2V's CLICK HERE PLEASE!

tomxy said:
Does anyone know if a 2v exhaust manifold is the same as a standard 250 head?

Will the extractors on my 250 1v fit on a 250 2V head?

Thanks
I have an xy wagon and was lucky enough to score a 2v head for my 250. After some serious head work on it, I (briefly) ran the stock exhaust manifold until I installed some Genie extractors, which I had aluminium ceramic coated.

In answer to your question, yes, the exhaust patterns are identical, or at least, interchangeable.

Now here's my question.... anyone know who will make a blower kit for same?

Cheers, Jess.
 

·
Ford Forums Member
Joined
·
47 Posts
Discussion Starter #9
Re: ANYONE THAT KNOWS ANYTHING ABOUT 250 2V's CLICK HERE PLEASE!

JesseB said:
I have an xy wagon and was lucky enough to score a 2v head for my 250. After some serious head work on it, I (briefly) ran the stock exhaust manifold until I installed some Genie extractors, which I had aluminium ceramic coated.

In answer to your question, yes, the exhaust patterns are identical, or at least, interchangeable.

Now here's my question.... anyone know who will make a blower kit for same?

Cheers, Jess.
Hey Jess,

Do you have any pics of your wagon?

I have heard that standard exhaust manifolds dont work with a 2v, they need extractors.

I think that "Paxton" have supercharger kits that will fit the 250, if thats what you want?

What work did you have done to your head, as i am in the middle of reconditioning my 2v head and it would be good to know what are some good mods to increase power?

Cheers
Tom
 
1 - 9 of 9 Posts
Top