Ford Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
'98 3.6L V-6

I've got the MAF exposed. Removed one T-20 TORX. But it looks like the
second bolt has some sort of gray cap that fits in the head that
prevents me from getting the bit into the slots. The other bolt had no
such covering and came right off.....

Anyone know about this?....
 
G

·
Discussion Starter · #2 ·
Epoxy... kind of a "double tamper-proof". I use a small pair of vise grips
to remove and install these.


<[email protected]> wrote in message
news:[email protected]
> '98 3.6L V-6
>
> I've got the MAF exposed. Removed one T-20 TORX. But it looks like the
> second bolt has some sort of gray cap that fits in the head that
> prevents me from getting the bit into the slots. The other bolt had no
> such covering and came right off.....
>
> Anyone know about this?....
>
 
G

·
Discussion Starter · #3 ·
Jim Warman wrote:
> Epoxy... kind of a "double tamper-proof". I use a small pair of vise grips
> to remove and install these.
>


As I was staring at the darn thing, I got the same idea and managed to
get the thing loose......cleaned the MAF with contact cleaner and idle
problem solved....Thanks for the reponse....
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top