[Mongrell]

Post UR BA XR8 Boss 260 Dyno Results Here.
I'v ordered mine and want to know what proud owners are getting at the wheels , Oh and if you want to talk about your pleasures with the Boss then feel free

Mongrell

 

[ORSMXR]

hey buddy stock 205kw now with cats back quad exhuast and cold air 232.6rwk

 

[XRFPV8]

Mongrell, as in signature 226 rwkw auto.
when you have done plenty of klm's then get yours on dyno they seem to take a long time to fully loosen up...
mine, rays 229 rwkw man, rodderz 240 rwkw man, and rods 290 pursuit auto has 268 rwkw have all been on the same dyno..

 

[EB 5.6]

Mongrell, as in signature 226 rwkw auto.
when you have done plenty of klm's then get yours on dyno they seem to take a long time to fully loosen up...
mine, rays 229 rwkw man, rodderz 240 rwkw man, and rods 290 pursuit auto has 268 rwkw have all been on the same dyno..

auto 5.4 2000 klms, cold air intake, helix, throttle body, underdrives, 180rwkw. will dyno on a "shootout" dyno soon, as my dyno reads approx 10kw low.

 

[Rodderz]

Just be wary of the dyno figures, some places will read high, some low, usually high as thats when the customers are happy. Those who attended the APS tech day were shown just how easy you can get a higher kw output and fudge the figures with nothing to do with the car, only correct/incorrect dyno practises

 

[memphis]

http://www.fordgallery.com/showphoto.php/photo/6172/password//sort/1/cat/all/page/1

Check the link out....

 

[XRQTOR]

hey buddy stock 205kw now with cats back quad exhuast and cold air 232.6rwk

Thats a good gain for just zorst and cai. What's the spec on your zorst setup if you dont mind sharing.

 

[XRFPV8]

(Phantom) Rays XR8 sedan has simular 229rwkw BPT CAI, Pacemaker headers with twin 3' with 3 1/2 over the diff.
at APS tuning day everyone made a comment Best sounding BA.

 

[XRQTOR]

(Phantom) Rays XR8 sedan has simular 229rwkw BPT CAI, Pacemaker headers with twin 3' with 3 1/2 over the diff.
at APS tuning day everyone made a comment Best sounding BA.

I thought pacemaker only made 2.5'' collectors, but herrod had 3''.

 

[XRFPV8]

I thought pacemaker only made 2.5'' collectors, but herrod had 3''.

the system is 3 inch from the cats back..

 

[XRQTOR]

Ahhh right, how do you get the cats to go from 2.5'' to 3''.

 

[XRFPV8]

they might be 3 inch cats just bolt up if they are 2 1/2 inch cats just bolt up the same.
the flange plates are all pretty much standard...

 

[XRQTOR]

Fair enough.

 

[Fordy]

the system is 3 inch from the cats back..

So is ray running standard cats then??

Does it make any difference performance wise running the 2.5 inch collector into a 3 inch pipe or vice versa???

 

[XRFPV8]

So is ray running standard cats then??

Does it make any difference performance wise running the 2.5 inch collector into a 3 inch pipe or vice versa???

no Ray is not running standard cats they are aftermarket cats.
i am not sure what brand you might have to ring Tallah made zorsts in Melton Vic..

 

[flavze]

bog stock 04 xr8 ute with 3500kays.

 

[XRQTOR]

Thats a good start there mate

 

[boss 8]

Mate you got yourself a beauty, :hy: it would be good to see another dyno in about another 10,000k's would be up there with a couple of gt's.

How does it compare with the last ute?

 

[BA330ci]

CAI,Cat back Redback twin, Hurricane headers - 29k's - 227.1 rwkw's

 

[Fordy]

CAI,Cat back Redback twin, Hurricane headers - 29k's - 227.1 rwkw's

You wouldnt happen to have a pic of your Dyno sheet, it would be interesting to see what the graph looks like with the Hurricane headers.