Ford Forums banner
1 - 1 of 1 Posts
G

·
Discussion Starter · #1 ·
Re: Ranger Heater Core

Remove the glove box. Under the dash on the Right side, remove the
cardboard cover. There are several black plastic screws holding this in
place. Remove the lower half of the black plastic cover ( 4 small screws).
with the heater hoses unattached, the heater core will just slip out.
There are no clamps or screws holding the core in place, only the support
of the black cover.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top