G
Guest
·Re: Repainting Lamp Guards
Yup done this one myself,
The best way to do it. Choose a very cold day. So the paint is brittle and
not soft. Then heat up along one edge only, not all the way round. Then chip
the paint with a paint scraper and it will come off.
Treat with hammerite. Much better at rust prevention.
Yours
Andy
"hugh" <[email protected][127.0.0.1]> wrote in message
news:[email protected]
> Mine are getting rusty ands the plastic type coating is peeling off. Any
> suggestions as to how to strip it? It seems impervious to Nitromors.
> --
> hugh
> Reply to address is valid at the time of posting
Yup done this one myself,
The best way to do it. Choose a very cold day. So the paint is brittle and
not soft. Then heat up along one edge only, not all the way round. Then chip
the paint with a paint scraper and it will come off.
Treat with hammerite. Much better at rust prevention.
Yours
Andy
"hugh" <[email protected][127.0.0.1]> wrote in message
news:[email protected]
> Mine are getting rusty ands the plastic type coating is peeling off. Any
> suggestions as to how to strip it? It seems impervious to Nitromors.
> --
> hugh
> Reply to address is valid at the time of posting
