Ford Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
1,090 Posts
Discussion Starter #1 (Edited)
hi guys
i need a diff center before march

dosn't matter what ratio
dosn't have to be LSD

must be for a 9"
around the $200 mark
any area

cheers guys
 

·
jai460
Joined
·
9 Posts
zanga i would love to see at least 3.7 to 1 ratio in the ass of your tank but 3.5 you may ??? get away with , for optimum 1/4 mile performance with your car 3.9 to 1 ratio would be the go .... Second hand gears and clutches would be fine as you could always freshen up the center with some new clutches and a steel hat and even later a new alloy pinion support...TyreToaster what size yolk does the s/hand center come with and how pitted are the gears?


IF ANYONE IS INTERESTED I HAVE SOME PERFORMANCE PARTS FOR SALE !!!

Brand new SPLIT FIRE 2 5/8 " OIL TEMP GAUGE. $65
Brand new SPLIT FIRE 2 5/8 " TRANS TEMP GAUGE $65

Also Varius XC PARTS - GS Dashes
- 12 slot wheels
- Single rail 4 speeds and b/warner lsd diffs.
- Complete XC Ute.

Much much more available upon Request...
either email me at [email protected]
or send a personal message via the forums or post a reply....

P.S. Also available is a fully reconditioned 460 big block short engine $2850 :wnc: sorry i'm new at this , this reply was meant for sickzk
 

·
Never enough Horse Power
Joined
·
47 Posts
Its ok Jai a phew of us are still finding our way. I will pass this on to Tyretoaster.

THEONE you could try Tyretoaster as he is helping me with a 9" centre
 

·
slikxb
Joined
·
220 Posts
For around $200 you could buy an open centre from a diff shop, american importers\speedshop (2.75). No-one wants 2.75 or non lsd so they are dirt cheap. Ring around. Apparently Geelong Differetials do a mod to open (non-lsd) centres to turn them into lsd, spose to be good too, so buying an open centre isn't a dead loss.
 

·
gilbiegt351
Joined
·
166 Posts
G`day are the b/warner lsd`s leaf spring & with caliper brackets welded to the axle tube.
If so how much are they.

Regards James.

IF ANYONE IS INTERESTED I HAVE SOME PERFORMANCE PARTS FOR SALE !!!

Brand new SPLIT FIRE 2 5/8 " OIL TEMP GAUGE. $65
Brand new SPLIT FIRE 2 5/8 " TRANS TEMP GAUGE $65

Also Varius XC PARTS - GS Dashes
- 12 slot wheels
- Single rail 4 speeds and b/warner lsd diffs.
- Complete XC Ute.

Much much more available upon Request...
either email me at [email protected]
or send a personal message via the forums or post a reply....

P.S. Also available is a fully reconditioned 460 big block short engine $2850 :wnc: sorry i'm new at this , this reply was meant for sickzk[/QUOTE]
 

·
Registered
Joined
·
13 Posts
jai460 said:
Brand new SPLIT FIRE 2 5/8 " TRANS TEMP GAUGE $65
I'm looking for a trans temp gauge. I could be interested. How about you send me the gauge and $335 and we'll call it quits.


jai460 said:
P.S. Also available is a fully reconditioned 460 big block short engine $2850
I've also got a mate who could be very interested in this. He's got a cam for a 460 (well 98% of one anyway), but he's just lacking the actually 460 block to put it in. By the way nice wheels on your falcon, how much did they set you back?

Just a warning to all. I'd be very wary about handing any money over to jai460 for any goods. Feel free to PM me if you're interested why?
 

·
Registered
Joined
·
661 Posts
I have a 9" centre in the shed, complete it has 3.7 ratio
is a 4 pinion and has a mini spool, nothing wrong with it at all.
I am in Parramatta, but want $250 minimum.
Will get more if I advertise, but will sell for that.
PM me if interested.
 

·
gilbiegt351
Joined
·
166 Posts
TICK4D said:
I have a 9" centre in the shed, complete it has 3.7 ratio
is a 4 pinion and has a mini spool, nothing wrong with it at all.
I am in Parramatta, but want $250 minimum.
Will get more if I advertise, but will sell for that.
PM me if interested.
How Close To The Cooma NSW Are you We Must Have It.

Regards James.
 

·
Registered
Joined
·
1,090 Posts
Discussion Starter #11
man you should hi jack my thread ,
 
1 - 12 of 12 Posts
Top