Welcome to the forums.

What kind of vehicle do you have?

 

i have on 03 ford mustang gt 40th anniversary.. :HAHA:

 

Bump..

 

You should post this problem in the Mustang section. Here's are the wiring diagrams. Fuse 26 is good?

 

Moved to the Mustang section.

 

Can anyone tell my what they think is wrong and what or how i should fix it... plz and thanks..

 

Have you checked fuse 26? Look at the diagram and test the system with a teat light if the fuse is good.

 

Check fuses and relays (if any). If they are good remove wiper arms and cowl. the wiper motor should be visable (I'm guessing they still put em there. last one i did was on a 91 fox body.) Turn on wiper switch on HI the take a multimeter and backprobe the electrical connector to motor(not sure which color wire is hot on these.) Anyway if u get voltage your switch is good. Take a big hammer and hit the wiper motor with it (may or may not work.) doesnt matter as motor is likely shot anyway.

 

All my fuses work... relays, not sure how to check those or even where they are located... but my wipers dont work at all.. even when i push the button to make it shoot out water, that doesnt work either...

any settins wipers wont work... and the water doesnt come out...... hmmmm...

 

Here's the engine fuse box diagram. You can try switching the relays and see if they work. Otherwise you need to check with a test light or voltmeter.

 

I checked my fuses and the relays so everything is fine, so im stuck from here... =/

 

I dont know if this might have anything to do with it but none of my lights on the dash arent lighting up... no brake light warning... or anything.. check engine light still works.. but its on b.c my o2 sensor... so ya ..

 

Might be a good idea to take it to a mechanic. Electrical issues can be hard to diagnose, especially over the internet.

 

if the wipers and squirters arent working it could be a problem with an entire circuit. Check all fuses and also use a multi meter to see if the motor itself is getting power